40IMX4-03-8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters have become an increasingly popular choice for a variety of applications due to their flexibility and power efficiency. The 40IMX4-03-8 is a particular type of DC-DC converter that has found use in a variety of industrial and consumer applications. This article will discuss the key features of the 40IMX4-03-8, its applications, and its working principle.

Features of the 40IMX4-03-8

The 40IMX4-03-8 is a DC-DC converter made by CUI Inc. It is a 4-switch buck converter that has an output current of 3A. It offers low ripple, low power consumption, and advanced error compensation to enable tight output current and voltage regulation. The internal hysteretic control loop and internal MOSFETs minimize the external component count. The device has an input average current mode of 1.2A with built-in current limit and short circuit protection. Other features include a wide input voltage range of 3V to 16V, a wide output voltage range of 0.8V to 13.5V, and a wide temperature range of -40°C to 125°C. The 40IMX4-03-8 also offers cycle-by-cycle current-limit protection and over/under-voltage protection.

Applications of the 40IMX4-03-8

The 40IMX4-03-8 is suitable for a variety of applications, such as alternative energy systems, battery powered systems, automotive systems, and consumer electronics. The device can be used to charge and maintain batteries, to regulate power supplies, to control chargers and converters, and to power LED lighting. The device is also useful for powering low power embedded systems or circuits that require a stable power source.

Working Principle of the 40IMX4-03-8

The 40IMX4-03-8 works on the principle of buck-boost conversion, which is a popular method for DC-DC conversion. This method works by converting a higher input voltage into a lower output voltage. The converter comprises two switches, each controlled by the logic signal and an oscillator, that alternately connect the input voltage to either the load or the ground. During the “on” cycle, the input voltage is connected to the load, and during the “off” cycle, it is connected to the ground. This rhythmic on-off cycle is repeated continuously to reduce the input voltage to a lower output voltage.

In addition, the 40IMX4-03-8 also utilises hysteretic control and pulse-width modulation. Hysteretic control is a type of feedback loop that helps to regulate the output voltage by comparing the output voltage to a reference set point. Pulse-width modulation works by modulating the duty cycle of the switching cycle so that it has less of an effect on the output voltage. By using these two methods, the device is able to maintain a stable output voltage over a wide range of input voltages.

Conclusion

The 40IMX4-03-8 is a versatile DC-DC converter that can be used for a variety of applications. It uses buck-boost conversion, hysteretic control, and pulse-width modulation to regulate the output voltage over a wide range of input voltages. The device is suitable for powering low power embedded systems, alternative energy systems, battery powered systems, automotive systems, and consumer electronics.

The specific data is subject to PDF, and the above content is for reference