| Allicdata Part #: | 40J180E-ND |
| Manufacturer Part#: |
40J180E |
| Price: | $ 0.59 |
| Product Category: | Resistors |
| Manufacturer: | Ohmite |
| Short Description: | RES 180 OHM 10W 5% AXIAL |
| More Detail: | 180 Ohms ±5% 10W Through Hole Resistor Axial Wire... |
| DataSheet: |  40J180E Datasheet/PDF |
| Quantity: | 1000 |
| 250 +: | $ 0.53460 |
| Series: | Ohmicone® 40 |
| Packaging: | Bulk |
| Part Status: | Active |
| Resistance: | 180 Ohms |
| Tolerance: | ±5% |
| Power (Watts): | 10W |
| Composition: | Wirewound |
| Features: | -- |
| Temperature Coefficient: | ±20ppm/°C |
| Operating Temperature: | -- |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.406" Dia x 1.902" L (10.30mm x 48.30mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through hole resistors are small electronic components that can find a variety of applications in many different electrical and electronic systems. The 40J180E is a type of through hole resistor that offers various advantages for both consumer and industrial applications. This article will discuss the application field and working principle of the 40J180E.
The 40J180E is a type of through hole resistor that is designed for a variety of applications. This type of resistor can be used for power supply systems, audio and video applications, and other similar applications. The design of the resistor allows it to dissipate heat more efficiently, allowing it to operate at higher power ratings than other types of resistors. The resistance value of the 40J180E ranges from 100 ohms to 1,000 ohms, which makes it suitable for a variety of applications. Additionally, the 40J180E is easily stackable, making it ideal for through-hole applications.
The most common application for the 40J180E is as a current limiting resistor in power supply systems. When used in this capacity, the resistor is used to limit the current flow through the system and provide protection to any sensitive and frail electrical components. The resistor is also used to provide a safe operating range for power supplies, as its resistance rating can be adjusted to meet the various needs of the system. Additionally, the 40J180E can be used as an audio and video signal isolator in audio and video applications.
The working principle of the 40J180E is based on the Joule\'s Law of heating, which states that the amount of heat produced by a current-carrying conductor or resistor is proportional to the square of the current. The amount of power that can be dissipated by a resistor depends on its type and size, as well as the temperature of the environment in which the resistor is operated. In the case of the 40J180E, its power rating can reach up to 10 watts, depending on the temperature and the design of the resistor.
In addition to its use as a current limiter and audio/video signal isolator, the 40J180E can also be used as an amplifier in certain applications. This is because of its relatively high power rating and low resistance rating, which make it well-suited to be used as an amplifier. Furthermore, the 40J180E can also be used as a voltage divider in high impedance circuits, such as voltage dividers in low frequency electrical circuits.
The 40J180E is an extremely versatile resistor, which makes it an ideal choice for many different types of applications. Its relatively high power rating, low resistance rating, and stackable design make it ideal for use in through-hole applications, while its cost-effectiveness makes it a cost-effective solution for many consumer and industrial applications. Therefore, it is no surprise that the 40J180E has become a popular choice for a wide variety of applications.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| 40J10KE | Ohmite | 0.77 $ | 1000 | RES 10K OHM 10W 5% AXIAL1... |
| 40J120 | Ohmite | 0.65 $ | 1000 | RES 120 OHM 10W 5% AXIAL1... |
| 40J1K0E | Ohmite | 1.09 $ | 209 | RES 1K OHM 10W 5% AXIAL1 ... |
| 40J1K2E | Ohmite | 0.64 $ | 1000 | RES 1.2K OHM 10W 5% AXIAL... |
| 40J125E | Ohmite | 0.59 $ | 1000 | RES 125 OHM 10W 5% AXIAL1... |
| 40J12RE | Ohmite | 0.59 $ | 1000 | RES 12 OHM 10W 5% AXIAL12... |
| 40J180E | Ohmite | 0.59 $ | 1000 | RES 180 OHM 10W 5% AXIAL1... |
| 40J150 | Ohmite | 0.65 $ | 1000 | RES 150 OHM 10W 5% AXIAL1... |
| 40J1K2 | Ohmite | 0.7 $ | 1000 | RES 1.2K OHM 10W 5% AXIAL... |
| 40J15RE | Ohmite | 1.02 $ | 127 | RES 15 OHM 10W 5% AXIAL15... |
| 40J1K1E | Ohmite | 0.64 $ | 1000 | RES 1.1K OHM 10W 5% AXIAL... |
| 40J18RE | Ohmite | 0.59 $ | 1000 | RES 18 OHM 10W 5% AXIAL18... |
| 40J120E | Ohmite | 0.59 $ | 1000 | RES 120 OHM 10W 5% AXIAL1... |
| 40J1K8E | Ohmite | 0.64 $ | 1000 | RES 1.8K OHM 10W 5% AXIAL... |
| 40J1013 | Grayhill Inc... | 0.39 $ | 1000 | LOCKWASHER INT 3/8 SS NON... |
| 40J100 | Ohmite | 1.11 $ | 101 | RES 100 OHM 10W 5% AXIAL1... |
| 40J150E | Ohmite | 0.59 $ | 1000 | RES 150 OHM 10W 5% AXIAL1... |
| 40J1K5E | Ohmite | 0.64 $ | 1000 | RES 1.5K OHM 10W 5% AXIAL... |
| 40J10K | Ohmite | 0.84 $ | 1000 | RES 10K OHM 10W 5% AXIAL1... |
| 40J1K0 | Ohmite | 0.7 $ | 1000 | RES 1K OHM 10W 5% AXIAL1 ... |
| 40J10R | Ohmite | 0.81 $ | 1000 | RES 10 OHM 10W 5% AXIAL10... |
| 40J100E | Ohmite | 1.02 $ | 262 | RES 100 OHM 10W 5% AXIAL1... |
| 40J1R5E | Ohmite | 0.98 $ | 1000 | RES 1.5 OHM 10W 5% AXIAL1... |
| 40J1R0E | Ohmite | 1.72 $ | 248 | RES 1 OHM 10W 5% AXIAL1 O... |
| 40J10RE | Ohmite | 1.28 $ | 321 | RES 10 OHM 10W 5% AXIAL10... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...