40SRC250

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 40SRC250 is an application field of electrical specialty fuses. It is a single pole circuit breaking device that is designed to provide quick and effective short-circuit protection. It is suitable for use in residential, commercial, and industrial applications. The 40SRC250 is suitable for use in residential, commercial, and industrial applications, and it is certified to UL, CSA, and IEC standards. It can be installed in any orientation, as the fuse has no polarity requirements. The fuse can also be tested for continuity by using a multi-meter or continuity tester.

The 40SRC250 is composed of two components: the striking tip and the contact plate. The striking tip is the part of the fuse that makes contact with the contact plate. This contact creates a spark which heats up the surrounding air, creating a pressure wave. This pressure wave is then used to break the circuit by breaking contact between the two terminals. The pressure wave causes the contact plate to detach from the terminus and travel farther away.

The 40SRC250 also has an arcing mechanism, which is a spring-loaded contact that strikes the contact plate when an overload occurs. This helps to prevent further overloads, as the contact plate is instantly displaced, breaking contact and safely preventing further overloads. The contact plate also has a built-in active air gap, which helps to prevent electrical arcing from occurring between the two fusing contacts.

The 40SRC250 is also equipped with a built-in timer, which delays opening of the contact plate for a few milliseconds, allowing valuable time for power electronics to react and shut down. The time delay is adjustable, and it is programmed into the fuse to achieve the desired fault protection characteristics that best suit the application. This type of fuse also has an optional two-stage feature, which uses the same contact plate as the delay timer, but with two different thresholds of resistance. This allows the upper threshold to serve as the primary protection, and the lower one as the secondary protection.

The 40SRC250 is designed to protect against short-circuit events caused by various electrical faults, such as overcurrents, undercurrents, earth faults, and surge currents. It is also suitable for use in ground fault circuit interrupter (GFCI) and residual current circuit breaker (RCCB) applications, as it has the built-in Self-reaching Trip Communication (SRTC) feature, which enables the user to determine the tripping cause through LEDs or LCD display.The 40SRC250 is tested and certified to UL, CSA, and IEC standards, and it is suitable for use in domestic, commercial, and industrial applications.

The specific data is subject to PDF, and the above content is for reference