4114R-1-100LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays have a wide range of applications and applications such as 4114R-1-100LF are not exception. 4114R-1-100LF is a type of resistor network. It is basically a combination of resistors that are arranged in a certain way with each resistor connected to a fixed position in the network. It is designed to have two sets of terminals, a common and an output. The common terminals connect to a common point in the network, while the output terminals connect to an external device.

In a 4114R-1-100LF resistor network, the resistors are arranged in a four terminal lens arrangement. This type of network is commonly used in DC application, as it provides a bias voltage between two terminals, while the other two terminals are provided with a common reference point. This arrangement ensures that the same voltage is applied to both the load and the input side of the network.

The working principle of the 4114R-1-100LF resistor network is simple. The common terminal is connected to a common point in the network, while one end of each resistor is connected to a different output terminal. When the input voltage is applied to the network, the resistance values of the resistors will determine the DC output voltage. Depending on the value of the resistors, the output voltage can be higher or lower than the input voltage.

In terms of advantages of using the 4114R-1-100LF resistor network, it offers cost-effective solutions for DC applications. It requires very little circuitry to achieve a desirable output voltage. This makes it an ideal solution for applications such as audio applications, where the output voltage is needed. Due to its four terminal arrangement, the resistor network also has very low voltage drops, minimizing power loss while providing higher output voltages.

4114R-1-100LF are widely used in the fields of consumer electronics, industrial electronics, power supplies, audio systems and automotive applications. In consumer electronics, these networks are used to provide voltage stabilizers, low pass filters, charge pumps and pulse circuits. In industrial electronics, they are used in attenuators, bandpass filters and phase shifters. In power supplies, they are used to provide isolation and logic systems. For audio systems, they are used to provide impedance matching and frequency response control.

As can be seen, the 4114R-1-100LF resistor network has a wide range of applications. Its four terminal lens arrangement allows for precise voltage regulation and its cost-effective design makes it an ideal solution for many DC applications. The resistor network is thus widely used in many applications, from consumer electronics to industrial electronics.

The specific data is subject to PDF, and the above content is for reference