4114R-3-331/471LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays, is a category of electronic features used to create intricate electrical circuits. In this article, we will explore the application field and working principle of the 4114R-3-331/471LF resistor network.

A resistor network is a set of interlinked resistors, configured in a certain manner that helps control the flow of electric current. The 4114R-3-331/471LF is an example of such a network. It is a 4-part resistor network, composed of three resistors, R1, R2, and R3, and one diode, D1. All of these components are connected in series in a loop, with R1, R2, R3, and D1 each connected in line with the other.

The 4114R-3-331/471LF is mainly used for general-purpose switching and protection applications involving DC voltages up to 40V and currents up to 1A. It is especially suitable for low voltage, low current applications such as power source protection, lighting control, and switch-mode power supplies.

The working principle of this resistor network is based on the principle of negative resistance, which is essentially the resistance of an element to a change in voltage. This resistance is inversely proportional to the applied voltage: the higher the voltage, the lower the resistance. This means that the higher the voltage, the higher the amount of current flowing through the resistor network.

The 4114R-3-331/471LF operates this principle of negative resistance by using a diode to control the current and voltage that flows through the circuit. The two resistors, R1 and R2, are connected in series between the voltage source and the diode, creating the so-called “diode-controllable voltage drop”. When the diode is conducting, the voltage across R2 is equal to 0, meaning that the current is equal to the voltage of the voltage source divided by the resistance of R1. When the diode is not conducting, the voltage across R2 is equal to the applied voltage, meaning the current is equal to the voltage divided by both R1 and R2. The third resistor, R3, is used to lower the voltage and current on the output of the circuit.

By combining all these components together in this way, the 4114R-3-331/471LF resistor network creates a stable and controllable electrical circuit that is suitable for a variety of different applications. It is primarily used for low voltage and low current applications, particularly those involving protection and switching of power sources.

To sum up, the 4114R-3-331/471LF resistor network is a versatile, easy-to-use set of components used in a variety of different applications. It works on the principle of negative resistance, using a diode to control the current and voltage that flows through the network. It is primarily used for power source protection and switching, as well as low voltage and low current applications.

The specific data is subject to PDF, and the above content is for reference