4114R-1-182LF

Number of Pins:	14
Height - Seated (Max):	0.185" (4.69mm)
Size / Dimension:	0.765" L x 0.300" W (19.43mm x 7.62mm)
Supplier Device Package:	14-DIP
Package / Case:	14-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	250mW
Series:	4100R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	7
Tolerance:	±2%
Resistance (Ohms):	1.8k
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks, also known as resistor arrays, are one of the most basic types of passive electronic components used in circuits. A resistor network (RN) is an arrangement of several discrete resistors, or other passive electrical components. The resistors in a resistor network are usually arranged in an ordered pattern, such as a honeycomb or a daisy chain, and each one is assigned a specific value of resistance.The 4114R-1-182LF is a common resistor network used in a variety of applications. It is a four-resistor network consisting of two 14 Ohm, one 1 Ohm, and one 82 Ohm resistors, connected in a daisy chain configuration. This configuration is commonly used in power management applications, such as in voltage regulation on personal computers and laptops. The resistors can be used to create a voltage divider circuit, with the 82 Ohm acting as the input resistance, and the other three resistors forming the output resistance.The 4114R-1-182LF can also be used for impedance matching in audio and video applications. This is done by connecting the resistors in specific patterns to create the desired amount of impedance. For example, when connected in parallel, the 1 Ohm and 14 Ohm resistors create an 8 Ohm load, and when connected in series, the 1 and 82 Ohm resistors create a 83 Ohm load. By connecting the resistors in different combinations, the desired impedance can be created.This resistor network can also be used for current limiting in AC power circuits. By connecting the four resistors in series, and connecting the two 14 Ohm resistors in parallel, the circuit is configured as a voltage divider, with the 1 Ohm resistor acting as the current limiting resistor. The current flowing through the circuit is determined by the formula I=V/R, where V is the voltage of the circuit, and R is the total resistance of the resistor network. By setting the resistance value of the 1 Ohm resistor to a specific value, the current flowing through the circuit can be limited to that value.The 4114R-1-182LF is a versatile resistor network, useful in a variety of applications. The various combinations of resistors can be used to create the desired voltage division, impedance matching, or current limiting circuit, making it an ideal solution for a variety of electronic design needs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description