4114R-3-302/622LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The 4114R-3-302/622LF is one of a class of resistor networks and arrays. Such devices are used for a variety of purposes in electronics and electrical engineering, including voltage conversion, soft start or surge current limiting, thermal control, and so on.

There are several types of 4114R-3-302/622LF networks, but they have the same basic construction. They each consist of four or more individual resistors arranged in a specific pattern and usually linked to a common ground or earth terminal.

The purpose of such networks is to provide a controllable resistance between two points, often the input and output of a circuit. This can be used to modify the voltage or current levels, provide surge protection, or simply to provide a convenient means of connecting two points.

The 4114R-3-302/622LF is designed for relatively low-power applications. It has a maximum rating of 0.5W for a single resistor and 2.5W for the entire network. The operating temperature range is -55°C to +150°C.

The 4114R-3-302/622LF is a precision resistor network. Each resistor is physically and electrically stable over time and temperature. The resistance values are guaranteed to within 0.1 ohms of the nominal value. This makes it ideal for use in precision measurement, signaling, and control systems.

This type of resistor network is also well suited for wide bandwidth applications as it is able to handle high-frequency signals without distortion. It is particularly useful in amplifier circuits where it can form part of a high-pass or low-pass filter.

The working principle behind the 4114R-3-302/622LF and other similar networks is fairly straightforward. Voltage is applied to one terminal and the current flows through the resistors in a predetermined ratio depending on their values. The different values allow for different levels of resistance at each point, allowing for precise control of voltage and current levels.

In summary, the 4114R-3-302/622LF and other resistor networks and arrays are used for a variety of purposes in electronics and electrical engineering. They are designed for precision control of voltages and currents and are especially useful in high-frequency applications such as filtering and signal processing.

The specific data is subject to PDF, and the above content is for reference