4116R-1-680LF

Number of Pins:	16
Height - Seated (Max):	0.185" (4.69mm)
Size / Dimension:	0.865" L x 0.300" W (21.97mm x 7.62mm)
Supplier Device Package:	16-DIP
Package / Case:	16-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	250mW
Series:	4100R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	8
Tolerance:	±2%
Resistance (Ohms):	68
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, ArraysThe 4116R-1-680LF is a type of resistor network and array in the field of electronics. It consists of sixteen resistors that are connected in a specific pattern so as to access all resistors individually from one side. These networks are typically used to interface integrated circuits with their corresponding circuit boards, which require the application of multiple resistances.The 4116R-1-680LF is a 4-terminal surface-mount chip resistor network that features an array of sixteen resistors. The resistors are arranged in a single row, which allows for easy contact for each of the sixteen resistors. All sixteen resistors are spread evenly across the network, typically with an individual resistance of 680 kilo ohms.The main application field of the 4116R-1-680LF is in the field of analog to digital conversion. This device is used to interface an analog input signal to an analog-to-digital converter chip. The resistors convert the signal obtained by the analog input into a discrete digital signal that can be measured and read by the converter. The resistance of the resistors is also important in this application, since higher resistance values are generally required for lower frequency signals.The working principle of the 4116R-1-680LF is based on the resistance network formed by the sixteen resistors. When a voltage is applied to the four terminals of the device, the resistance of the resistors in the network results in a form of signal splitting. This means that each of the sixteen resistors is responsible for a certain amount of voltage. The voltage across each resistor is then tapped from one side of the device and sent to an analog-to-digital converter.The 4116R-1-680LF is a very versatile device since it is capable of handling a wide range of input signals. The twenty-five ohm resistors of the network provide a high degree of accuracy and stability, allowing for a more consistent signal conversion. Furthermore, the resistors can be individually calibrated for specific applications, allowing for a high degree of customization and flexibility. The 4116R-1-680LF is also very cost-effective, since only one chip is required to provide the sixteen resistors required for the application. This means that a single 4116R-1-680LF can be used for a variety of different applications and functions. This is especially useful in fields such as automotive engineering, where multiple analog to digital conversions are often required.Finally, the 4116R-1-680LF is also relatively easy to use and install. Its surface-mount design and convenient pinning features mean that the device can be mounted onto a circuit board without too much difficulty. This makes it the ideal choice for applications where time and cost efficiency are of paramount importance.In conclusion, the 4116R-1-680LF is an excellent choice for a wide range of analog to digital conversion applications. Its sixteen resistors can be individually calibrated for specific applications, while its surface-mount design makes it easy to install. Furthermore, its affordability makes it an excellent choice for automotive engineering and other fields that require multiple analog-to-digital conversions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description