416F300X2ALT

416F300X2ALT Application Field and Working Principle

Crystals have been used for centuries in many practical devices and are commonly used as oscillators in applications such as digital clocks and in radio circuits. The 416F300X2ALT crystal oscillator is a commonly used oscillator used in consumer devices like cell phones, computers, and modems.

The 416F300X2ALT crystal oscillator is a quartz device with a frequency range between 19.2 MHz and 30 MHz. It is a hermetic, top-loaded type of crystal with a frequency tolerance of ±20 ppm and a typical aging rate of ±10 ppm per year. It has a low power consumption of 3.3V, a standby current of 5mA and a maximum power dissipation of 150mW.

The 416F300X2ALT crystal can be used as either an oscillator or a filter in its application. As an oscillator, the 416F300X2ALT can be used to generate an AC signal with a frequency that is accurately determined by the crystal’s mathematical constants. This AC signal can then be used to drive logic circuits and control the operation of digital devices. The 416F300X2ALT can also be used as a filter to remove noise from a signal, allowing only those frequencies that are within the specified range to pass through.

The 416F300X2ALT crystal oscillator works on the principle of resonance. When a voltage is applied to the two electrodes which are embedded in the quartz crystal, an electrical field is induced between them which causes the crystals to vibrate at a specific frequency. This frequency is determined by the crystal\'s physics and is not affected by varying temperatures, which means that the 416F300X2ALT crystal oscillator has a high stability.

The 416F300X2ALT crystal is a reliable and stable component that is suitable for many applications. It is used in consumer electronics such as cell phones, computers, and modems and has various other applications including navigation systems, satellite systems, electronic watches and clocks, measuring systems and medical equipment.

In conclusion, the 416F300X2ALT crystal oscillator is a reliable and stable component used in many applications. It works on the principle of resonance, where an electrical field is induced between two electrodes embedded in the quartz crystal to produce vibrations of a specific frequency.