Allicdata Part #: | 41F56RE-ND |
Manufacturer Part#: |
41F56RE |
Price: | $ 0.81 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 56 OHM 1W 1% AXIAL |
More Detail: | 56 Ohms ±1% 1W Through Hole Resistor Axial Wirewo... |
DataSheet: | 41F56RE Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.73710 |
Series: | Ohmicone® 40 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 56 Ohms |
Tolerance: | ±1% |
Power (Watts): | 1W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.126" Dia x 0.437" L (3.20mm x 11.10mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are an integral part of any electronic system that requires precise readings of current or voltage. It is important to understand the various types of Through Hole Resistors, their applications and the way they work. This article will address the 41F56RE application field and working principle.
The 41F56RE application field is mainly in communication systems, such as PCS, PSTN and Cellular. It is a non-polarised, wire-wound resistor with a low-impedance (low resistance), which is well suited for high power applications. It is also used in high-power digital processing, digital signal processing (DSP) systems, and power line communication. It is suitable for use in both low and high voltage applications.
In terms of its working principle, the 41F56RE has an ohmic resistance that is low for a given temperature range and is designed to operate at a set current and voltage. This is done through the use of a number of different components. The resistance is determined by adjusting the number of turns of wire used to wind up the resistor, and the wire gauge used. The wire is also wrapped on a core material made of oxide or a metal alloy, which is then thermally insulated. The core material is then covered with a thin layer of insulating material.
The resistor also has two resistive electrodes that are connected to two terminal connections. When a current flows through the terminals, the resistive electrodes produce a potential difference, which is proportional to the amount of current passing through them. As the voltage across the resistor changes, the potential between the electrodes will also change, resulting in a change in resistance. The resistance of the 41F56RE can be adjusted to provide the precise level of precision required.
The 41F56RE is highly resistant to temperature changes due to its low-impedance core material and thermal insulation. This makes it ideal for use in extreme temperature environments. It also has a high current rating, which allows it to be used with high power applications such as power line communication, digital signal processing and digital processing systems. Its low-impedance core material makes it suitable for both low and high voltage applications.
The wire-wound resistor is composed of a central core and two sets of full-length copper wires. The variation in resistance, depending on current and voltage, is produced by altering the number of turns of wire in the central core. This type of resistor has a number of advantages over other types, such as its relatively low cost and its resistance to temperature changes. It is also relatively easy to assemble and install in electronic devices.
In conclusion, the 41F56RE Through Hole Resistor is an ideal choice for applications that require precise readings of current or voltage. It is highly resistant to temperature changes, has a low-impedance core material and has a high current rating. Its low cost and ease of installation make it a popular choice for a wide range of electronic applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
41F56RE | Ohmite | 0.81 $ | 1000 | RES 56 OHM 1W 1% AXIAL56 ... |
41F560E | Ohmite | 0.84 $ | 1000 | RES 560 OHM 1W 1% AXIAL56... |
41F5R0 | Ohmite | 0.86 $ | 1000 | RES 5 OHM 1W 1% AXIAL5 Oh... |
41F500E | Ohmite | 1.46 $ | 496 | RES 500 OHM 1W 1% AXIAL50... |
41F50RE | Ohmite | 1.4 $ | 1000 | RES 50 OHM 1W 1% AXIAL50 ... |
41F5R0E | Ohmite | 1.52 $ | 226 | RES 5 OHM 1W 1% AXIAL5 Oh... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...