4246B-10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Directional Coupler Introduction

An RF directional coupler is a subdivision of radio frequency (RF) transmission line, designed to allow a fraction of the power in the main line to be tapped off and measured without suffering significant power losses or degrading the performance of the main cable. It acts like a tap that monitors the current and voltage on its terminals in relation to the main line.

RF directional couplers are typically used in audio systems, cellular networks, WiFi networks, microwave link systems, broadcast transmitters, and military communication systems. They are used in a variety of applications where signal power measurement, signal transmission, antenna power matching, antenna test platform monitoring, system gain measurements, and more are required.

4246B-10 Application Field

4246B-10 is a 50-ohm RF directional coupler designed to provide a low-loss and high-accuracy path for signal transmission in a wide range of applications. It features an insertion loss of 1.30 dB max., return loss of 16 dB, and isolation of 39 dB. The device operates over a frequency range of 1 MHz to 10 GHz. Its frequency response is extremely flat, which allows it to provide accurate power measurement and other related testing.

The 4246B-10 provides a low-inductance coupler with a typical application of 500 mV across its inputs, which means it is an ideal choice for antenna measurements and other test system applications. It is suitable for indoor use and can be used in a variety of locations, including laboratories, workshops, and production sites.

The applications of 4246B-10 include antenna measurements, signal power measurements, antenna test platform monitoring, system gain measurements, antenna power matching, WiFi applications, and more.

4246B-10 Working Principle

The working principle of the 4246B-10 RF coupler is based on the electromagnetic wave equation. The electromagnetic wave equation describes the behavior of an electromagnetic wave as it propagates through space. The equation can be used to calculate the power received by a receiving antenna, and the energy dissipated by a transmitting antenna.

The working principle of the 4246B-10 RF coupler can be described as follows: The transmission line of the 4246B-10 is designed to have a certain length, which is typically between 0.06 and 0.17 meters. The length of the line determines the distance over which the signal propagates, and the frequency of the signal. The signal is received at the line input, and is then routed to the line output. At the same time, a fraction of the power is tapped off and sent to the coupler output.

The 4246B-10 RF coupler accomplishes this by using a series of capacitors and inductors, which act as a low-pass filter. The low-pass filter passes signals of frequencies below the cutoff frequency, while blocking signals of higher frequencies. This filter separates the desired signal from the undesired signal, allowing only the desired signal to pass to the coupler output.

The design of the 4246B-10 is optimized to provide a low-return-loss and low-insertion-loss performance. This allows the coupler to provide accurate power measurements under a wide range of conditions. Additionally, the coupler is designed to provide high isolation and low thermal noise, allowing it to be used in more challenging environments.

Conclusion

The 4246B-10 RF directional coupler is an ideal solution for a wide range of applications, including antenna measurements, signal power measurements, antenna test platform monitoring, system gain measurements, antenna power matching, WiFi applications. Its design incorporates low insertion loss, high isolation, and low thermal noise, which allow it to be used in more challenging environments. The working principle of the 4246B-10 is based on the electromagnetic wave equation and a low-pass filter, which separates the desired signal from the undesired signal.

The specific data is subject to PDF, and the above content is for reference