42J600E

Series:	Ohmicone® 40
Packaging:	Bulk
Part Status:	Active
Resistance:	600 Ohms
Tolerance:	±5%
Power (Watts):	2W
Composition:	Wirewound
Features:	--
Temperature Coefficient:	±20ppm/°C
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.220" Dia x 0.406" L (5.60mm x 10.30mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are components that can be used to limit the current flow, divide voltage, balance signal levels and adjust circuits. These passive components are available with a wide variety of power ratings, tolerance and temperature coefficients.The most frequently used through hole resistor is the 42J600E, which is a radial leaded resistor. 42J600E’s are designed to handle high voltage and power while providing stability and reliability. They are also ideal for applications that require long life and continuous operation.

Application Field

42J600E’s are used in a wide range of applications. They are used in high temperature and high power circuits like motors, high voltage power supplies, TV sets, smoke detectors and medical equipment. They can also be used in low voltage, low power circuits such as radio and sound systems. They are also ideal for use in electronic controls, solid state relays and automation equipment.

Working Principle

42J600E’s work in a fairly straight forward way. The resistors provide a set amount of resistance between two points on a circuit board. The resistors limit the amount of current that can flow in the circuit, and the resistance of the resistor determines the amount of current that can flow. The resistors also reduce the electrical noise that might get picked up by the circuit and prevent the circuit from overloading.The 42J600E resistors have two leads, the one on the left is the anode (positive side) and the one on the right is the cathode (negative side). When a current is applied to the anode, it will flow from the anode to the cathode and its flow will be determined by the resistance of the resistor. The physical construction of the resistor also affects how the current flows through the resistor. Different resistor designs use different approaches to limit the amount of current flowing through the resistor.In addition to current limiting, the 42J600E resistors can also be used for voltage division. Voltage divider circuits are used to split voltage into two or more different components. The voltage divider is made up of two or more resistors in series. The resistors are selected so that they limit different amounts of current, allowing them to divide the voltage.

Conclusion

The 42J600E is a reliable, high voltage, high power resistor that can be used in a wide range of applications. It is a through hole resistor that can be used for current limiting and voltage division. Its construction and resistance determine how it will act upon electrical circuits. As such, it is an important component in nearly all electrical applications and can help ensure that the circuit is reliable and safe.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description