4306R-101-680LF

Number of Pins:	6
Height - Seated (Max):	0.195" (4.95mm)
Size / Dimension:	0.584" L x 0.085" W (14.83mm x 2.16mm)
Supplier Device Package:	6-SIP
Package / Case:	6-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	200mW
Series:	4300R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	5
Tolerance:	±2%
Resistance (Ohms):	68
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks and arrays are composed of multiple resistors and are designed for a variety of applications. The 4306R-101-680LF is a model of one such device. The part is a 3- resistor array that includes a set of three 68-Ohm resistors in a single package. This component is suitable for commercial grade applications, and can be used in a variety of circuit configurations.

Structure of 4306R-101-680LF

The 4306R-101-680LF is a three-resistor array consisting of a three 68-Ohm resistors in a single surface mount package. The component is housed in a leaded 4-pin, power-tip Through-Hole package type. On the inside, this device has three individual resistors: two of them are 0.5W resistors, and each resistor is shielded by a metal shell. All three resistors are connected in parallel, which gives the device a value of 0.68Ω. Additionally, due to the presence of the metal shell, the component is protected from electrical interference.

Application Field

The 4306R-101-680LF is suitable for a variety of applications. This device is most commonly used in spread spectrum communication systems, because the device can provide protection from external EMI sources. This component is also commonly used in automotive applications, as the 68-ohm resistors provide protection against electrical noise in the car’s signal system. Additionally, this component can be used in consumer electronic devices, such as radios, cell phones, TVs, and other audio/visual equipment.

Working Principle

The 4306R-101-680LF is designed to provide resistance in a circuit. This device works by allowing current to pass only through its 68-Ohm resistors. The component has three parallel connections of 68-Ohms, resulting in an overall resistance of 0.58Ω. Due to the presence of the metal shell, the component also provides protection from electrical interference. The resistor array can be used in a variety of circuit configurations. Its low resistance makes it suitable for use in low-voltage systems, while the combination of resistor values and the metal shell make it suitable for medium-voltage applications as well. Additionally, the shielding provided by the metal shell makes this resistor array suitable for use in high-frequency applications, such as radio frequency communication systems.

Conclusion

The 4306R-101-680LF is a three-resistor array designed for use in commercial grade applications. Its three resistors have a combined value of 0.68Ω, making it suitable for low-voltage and medium-voltage applications. Additionally, the presence of the metal shell allows the component to provide protection from electrical interference, making it suitable for use in high-frequency systems. This component is commonly used in spread spectrum communication systems, automotive applications, and consumer electronic devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description