4309R-101-821

Number of Pins:	9
Height - Seated (Max):	0.195" (4.95mm)
Size / Dimension:	0.884" L x 0.085" W (22.45mm x 2.16mm)
Supplier Device Package:	9-SIP
Package / Case:	9-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	200mW
Series:	4300R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	8
Tolerance:	±2%
Resistance (Ohms):	820
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

A 4309R-101-821 network is a type of discrete-component array of resistors used in the fields of electrical engineering, digital electronics, and integrated circuits. The 4309R-101-821 network consists of two identical strings of resistors, each containing four resistors, connected in parallel with one another. A number of different resistor configurations can be configured in the two strings. The 4309R-101-821 resistor network is typically used to provide impedance matching in a variety of applications. In particular, it is often used to provide an effective divider of an input voltage, providing a stable voltage to the output. The 4309R-101-821 resistor network can also be used in filter circuits, oscillators, amplifiers, and other types of control circuits.The 4309R-101-821 resistor network is designed to ensure that the electrical current flows uniformly throughout the network without creating any undesired electrical noise. This is achieved by configuring the resistors in a configuration that ensures that the same value of current flows through each resistor. This allows the network to retain a balanced electrical flow, without being affected by any external electrical noise.The 4309R-101-821 resistor network is constructed using a particular type of resistor material known as an inductor body material. This type of material is designed to allow the passage of electrical current through it without inducting any losses. The inductor body material is designed to be both flexible and stiff, allowing for precise and consistent control of the electrical current through the network.The working principle of the 4309R-101-821 resistor network can be explained by considering the electrical current input and output, and the resistance of the individual resistors used in the network. The electrical current input can be thought of as a positive or negative voltage, while the output is the resistance level of the resistors. As the input voltage is increased, the resistor values are decreased, causing the electrical current to pass through the network in a uniform fashion. When the electrical current input is considered alone, the 4309R-101-821 resistor network will attempt to find a balanced resistance in order to support the required flow of current. The resistance value used in the network to achieve this balance is dependent on the type of resistor material used in the network. As the resistance values are decreased, the electrical current level is increased, thus providing a uniform flow of electrical current through the entire network.As mentioned earlier, the 4309R-101-821 resistor network is commonly used in a variety of applications to provide impedance matching. Impedance matching is a process by which amplifier or signal stages are matched according to their electrical load in order to optimize performance. The 4309R-101-821 network can be used in combination with amplifier stages to provide impedance matching and to achieve a desired signal level. The 4309R-101-821 resistor network has been used in a variety of applications for many years. It is a reliable and effective device that provides reliable electrical current flow and impedance matching in a wide range of situations. The 4309R-101-821 network is an important part of any electrical engineer\'s toolkit and is an invaluable component for a variety of electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description