4310R-101-185

Number of Pins:	10
Height - Seated (Max):	0.195" (4.95mm)
Size / Dimension:	0.984" L x 0.085" W (24.99mm x 2.16mm)
Supplier Device Package:	10-SIP
Package / Case:	10-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	200mW
Series:	4300R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	9
Tolerance:	±2%
Resistance (Ohms):	1.8M
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 4310R-101-185 is a resistor network that is designed for precision applications. This device is a four-element wirewound element array with resistor values of 1K5, 2K49, 4K91 and 8K2 ohms. This device combines four resistors in a single package and is ideal for high-frequency applications when low noise, high stability, accuracy and stability are needed.The 4310R-101-185 is also a 4-terminal resistor network whose output impedance is completely independent of the input current and can be configured for many functions such as current-voltage conversion, divider, and attenuator. This resistor network is commonly used in air traffic control systems, communication systems, and other precision instrumentation.The working principle of the 4310R-101-185 is relatively simple. At its most basic, the device acts like a voltage divider. When a voltage is applied to the network, it is divided among the four resistors in the network. The output voltage of the network is then determined by the ratio of the resistor values. This principle is used in many applications, such as in level shifting circuits, level adjusting circuits, and digital to analog converters.The 4310R-101-185 is a highly versatile resistor network, and it can be used in a variety of applications. In air traffic control systems, the device is used to adjust the signal level between two systems to ensure that there is no interference. In communication systems, the device is used to protect against overvoltage and undervoltage signals. In precision instrumentation, the device is used to set the level of a signal to be accurately measured.The device is also frequently used in automotive applications, such as for setting the idle speed of a vehicle’s engine. In an engine, the voltage at the idle speed sensor is regulated using the 4310R-101-185. The resistor network is adjusted to achieve the desired idle speed. The resistor values are adjusted to ensure that the voltage at the sensor is not too high, or too low.In power supply circuits, the device is used as a voltage divider. When high voltages are applied to the power supply, the resistor values in the device are adjusted to drop the voltage down to the correct levels. This is used to ensure the device is operating within the safety parameters of the device.There are a number of advantages to using the 4310R-101-185 as a resistor network. First, the device can be configured for many different functions. Second, the output impedance is completely independent of the input current. Third, the accuracy and stability of the device is excellent, making it ideal for precision applications. Finally, the device is relatively compact and cheap to manufacture.In conclusion, the 4310R-101-185 is an ideal device for precision applications, such as air traffic control systems, communication systems, automotive applications, and power supplies. The device is a four-terminal resistor network that combines four resistors in a single package. The working principle of the device is relatively simple, and the output impedance is completely independent of the input current. The device is also highly accurate and stable, and is relatively compact and cost effective.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description