4310R-101-391LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks, arrays, often used in analog circuits, are made up of a collection of resistors connected together in a circuit to perform necessary functions. One example is the 4310R-101-391LF resistor network, which is a two-resistor network for signal level translation. This article will explore what the product does, its applications, and its working principle.

What Does the 4310R-101-391LF Resistor Network Do?

The 4310R-101-391LF resistor network consists of two resistors connected together in parallel. It is designed to accomplish signal level translation between different logic signal levels, such as from an LVTTL logic level to a higher LVECL logic level. It allows a signal at one voltage level (typically 3.3V or 5V) to be translated to a higher voltage level, such as 8V.

Applications of the 4310R-101-391LF Resistor Network

The 4310R-101-391LF resistor network can be used in applications involving the conversion of logic signal levels. It is an ideal solution for devices, such as network interface cards and down convertors, which often require the use of different logic levels. By using this signal level translation network, designers can easily optimize their circuit designs to improve signal integrity and reduce electromagnetic interference.

Working Principle of the 4310R-101-391LF Resistor Network

The working principle of the 4310R-101-391LF resistor network relies on two resistors connected in parallel. A voltage source is connected to one resistor, while the other resistor is connected to ground. When a signal is applied to the voltage source, it is divided between the two resistors, and the voltage level of the output is a function of the ratio of the two resistors. In the case of the 4310R-101-391LF resistor network, the ratio of the two resistors is designed to produce an output voltage level which is higher than the input voltage level. This allows for a higher voltage output signal which is suitable for LVECL (Low Voltage Edge Controlled Logic) applications.

Conclusion

The 4310R-101-391LF resistor network is a two-resistor network designed for signal level translation. It is often used in digital circuits, as it allows low level logic signals to be translated to a higher voltage signal, such as 8V. This allows it to be used in applications that require different signal levels, such as network interface cards and down convertors. The working principle behind this resistor network relies on two resistors connected in parallel, whose ratio determines the output voltage.

The specific data is subject to PDF, and the above content is for reference