4310R-101-322

Number of Pins:	10
Height - Seated (Max):	0.195" (4.95mm)
Size / Dimension:	0.984" L x 0.085" W (24.99mm x 2.16mm)
Supplier Device Package:	10-SIP
Package / Case:	10-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	200mW
Series:	4300R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	9
Tolerance:	±2%
Resistance (Ohms):	3.2k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The 4310R-101-322 is a resistor network designed for use in signal routing and noise filtering applications. Its primary purpose is to provide a stable impedance path for signal propagation and noise suppression. This device has been used in a variety of situations where electrical characteristics, such as low pass filtering, impedance matching, and signal group isolation are required.The 4310R-101-322 is a monolithic network of resistors on a single chip. It consists of five individual resistors, each with their own independent value, connected together in a network. This allows for the configuration of different impedance values for varying circuit requirements. The device is designed to be used with active components as well as passive components. Its working principle is based on the resistances of the individual resistors combining to form the desired impedance value.The 4310R-101-322 is an example of an array of resistors (or a resistor network), which is a common configuration for impedance matching. For the most part, any combination of resistor values can be used to form a network. The resistor values can either be determined ahead of time or calculated using Ohm’s law. The most common connected resistors are one and two terminal devices, but three-terminal and four-terminal networks are possible as well.When configuring a resistor network, the most important factor is to maintain a constant impedance value over a wide range of frequencies. This is achieved by selecting individual resistor values and positions in the network so that the total impedance remains constant over a given frequency range. In addition to maintaining constant impedance, each resistor in the network also plays a role in noise filtering and signal routing.From an electrical point of view, the resistor network in the 4310R-101-322 acts as a low-pass filter. This type of filter is typically used in applications where noise suppression is essential. The filter consists of a series of resistors which act to limit the amount of high frequency noise that passes through the circuit. The individual resistors are connected in series in order to achieve a desired impedance value, and the frequencies which can pass through the device are limited by the combined resistance of the series.Another important application of the 4310R-101-322 is impedance matching. This type of application requires that the device is able to maintain a specific impedance value over a wide range of frequencies. If the device can maintain this value, then it can act as a bridge between two different impedance zones. For example, a device like this could be used to pass signals from one circuit to another.The 4310R-101-322 is a great example of a resistor network and its applications. It allows for the configuration of various impedances and for noise filtering, signal routing and impedance matching. Its ability to maintain a constant impedance value over a wide range of frequencies is a great benefit for impedance matching applications. It can also be used for low pass filtering for noise suppression.Overall, the 4310R-101-322 is an excellent device for use in signal routing and noise filtering applications. Its wide range of capabilities makes it a great choice for many different types of applications. Its ability to maintain a constant impedance value and its noise filtering properties makes it a great tool for use in a variety of situations.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description