Allicdata Part #: | 4310R-2-121-ND |
Manufacturer Part#: |
4310R-102-121 |
Price: | $ 0.18 |
Product Category: | Resistors |
Manufacturer: | Bourns Inc. |
Short Description: | RES ARRAY 5 RES 120 OHM 10SIP |
More Detail: | 120 Ohm ±2% 300mW Power Per Element Isolated 5 Res... |
DataSheet: | 4310R-102-121 Datasheet/PDF |
Quantity: | 1000 |
2000 +: | $ 0.15795 |
Number of Pins: | 10 |
Height - Seated (Max): | 0.195" (4.95mm) |
Size / Dimension: | 0.984" L x 0.085" W (24.99mm x 2.16mm) |
Supplier Device Package: | 10-SIP |
Package / Case: | 10-SIP |
Mounting Type: | Through Hole |
Applications: | -- |
Operating Temperature: | -55°C ~ 125°C |
Temperature Coefficient: | ±100ppm/°C |
Power Per Element: | 300mW |
Series: | 4300R |
Resistor-Ratio-Drift: | 50 ppm/°C |
Resistor Matching Ratio: | -- |
Number of Resistors: | 5 |
Tolerance: | ±2% |
Resistance (Ohms): | 120 |
Circuit Type: | Isolated |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Resistor Networks, Arrays
Resistor networks and arrays are a type of electrical component that can be used in circuits for a variety of applications. The 4310R-102-121 resistor network, in particular, is an extremely versatile component that can be applied in a variety of scenarios. This article will discuss the application fields and working principle of the 4310R-102-121 resistor network in detail.
Application Fields
The 4310R-102-121 is a type of resistor network that is specifically designed for decoupling. Decoupling is the process of breaking down higher voltage signals into smaller, lower-voltage signals. This can be achieved by using a resistor network with resistors arranged in series or parallel. In a parallel configuration, two separate resistors are connected in parallel with one another to create two separate signal paths for the current. In a series configuration, two separate resistors are connected in series, forming a single signal path for the current to travel along. This type of resistor network is ideal for decoupling because it allows a large amount of signal to be transmitted without overloading any one resistor.
The 4310R-102-121 can also be used for audio applications. It can be used to filter out any unwanted frequency components in an audio signal, allowing only the desired frequencies to pass through. This makes it ideal for applications such as equalization and reverberation, as well as for limiting the level of distortion in a signal.
The 4310R-102-121 can also be used for impedance matching in electronic circuits. This is done by using a set of resistors in series or parallel to reduce any differences in impedance between different parts of a circuit. This helps to ensure that all parts of the circuit are working efficiently, and reduces the chances of an electrical short.
Working Principle
The 4310R-102-121 works by placing two different resistors in a circuit. Depending on the desired application, the resistors can be arranged either in series or parallel. In a parallel configuration, each resistor will be connected to its own signal path. This allows a large amount of signal to pass through the resistors without overloading any one component. In a series configuration, the two resistors are connected in series, forming a single signal path for the current to travel along.
When the current flows through the resistors, it is divided amongst them. This division is proportional to their resistance. If the the resistors are chosen correctly, the division of current can help achieve the desired effect. For instance, if equal signals need to be passed through two different parts of a circuit, two resistors of equal value can be used in a parallel configuration. This will cause each resistor to take an equal amount of the current, and each component will receive the same signal.
The 4310R-102-121 can also be used for noise filtering. By choosing resistors of different values, it is possible to filter out low frequency noise while allowing higher frequency signals to pass through. This process is known as band-pass filtering, and can be very useful in applications such as noise suppression.
Conclusion
The 4310R-102-121 is a versatile resistor network that can be used in a variety of applications. It can be used for decoupling, audio applications, impedance matching, and noise filtering. Its working principle consists of placing two resistors in series or parallel, with the current divided between them according to their resistance. With correct design, this resistor network can be used to achieve the desired effect in a variety of situations.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
4310R-101-102LF | Bourns Inc. | -- | 1435 | RES ARRAY 9 RES 1K OHM 10... |
4310R-R2R-103LF | Bourns Inc. | 0.54 $ | 1040 | RES NTWRK 16 RES MULT OHM... |
4310R-104-331/471L | Bourns Inc. | 0.79 $ | 9065 | RES NTWRK 16 RES MULT OHM... |
4310R-101-222LF | Bourns Inc. | 0.66 $ | 7903 | RES ARRAY 9 RES 2.2K OHM ... |
4310R-101-103 | Bourns Inc. | -- | 3878 | RES ARRAY 9 RES 10K OHM 1... |
4310R-101-103LF | Bourns Inc. | -- | 6559 | RES ARRAY 9 RES 10K OHM 1... |
AD-4310PSMAJ-1 | Amphenol RF ... | 24.53 $ | 71 | CONN ADAPT SMA JACK-4.3/1... |
AD-4310JSMAP-1 | Amphenol RF ... | 24.53 $ | 1000 | CONN ADAPT SMA PLUG-4.3/1... |
AD-4310PNJ-1 | Amphenol RF ... | 29.52 $ | 103 | CONN ADAPT 4.3/10 PLUG TO... |
4310R-101-104LF | Bourns Inc. | 0.66 $ | 5816 | RES ARRAY 9 RES 100K OHM ... |
4310R-104-331/471 | Bourns Inc. | 0.65 $ | 4409 | RES NTWRK 16 RES MULT OHM... |
NJ501-4310 | Omron Automa... | 7.62 $ | 1000 | CONTROL LOGIC CPU 16 AXIS |
AD-4310P4310J-1 | Amphenol RF ... | 28.57 $ | 74 | CONN ADAPT JACK-PLUG 4.3/... |
AD-4310JNP-1 | Amphenol RF ... | 26.68 $ | 31 | CONN ADAPT N PLUG TO 4.3/... |
AD-4310JNJ-1 | Amphenol RF ... | 28.34 $ | 10 | CONN ADAPT N JACK TO 4.3/... |
AD-4310J4310J-1 | Amphenol RF ... | 29.35 $ | 9 | CONN ADAPT JACK-JACK 4.3/... |
AD-4310P4310P-1 | Amphenol RF ... | 30.22 $ | 17 | CONN ADAPT PLUG-PLUG 4.3/... |
AD-4310PNP-1 | Amphenol RF ... | 35.67 $ | 16 | CONN ADAPT 4.3/10 PLUG TO... |
AD-4310J4310J-2 | Amphenol RF ... | 37.77 $ | 39 | CONN ADAPT JACK-JACK 4.3/... |
AD-4310P4310J-2 | Amphenol RF ... | 40.9 $ | 17 | CONN ADAPT PLUG-JACK 4.3/... |
4310-013LF | Tusonix a Su... | 8.91 $ | 250 | CAP FEEDTHRU 3PF 100V AXI... |
4310-016LF | Tusonix a Su... | 11.4 $ | 250 | CAP FEEDTHRU 500PF 100V A... |
4310-018LF | Tusonix a Su... | 11.4 $ | 250 | CAP FEEDTHRU 1500PF 100V ... |
4310-015LF | Tusonix a Su... | 11.4 $ | 246 | CAP FEEDTHRU 250PF 100V A... |
4310-017LF | Tusonix a Su... | 11.4 $ | 220 | CAP FEEDTHRU 1000PF 100V ... |
4310-012LF | Tusonix a Su... | 11.94 $ | 250 | CAP FEEDTHRU 100PF 200V A... |
4310-014LF | Tusonix a Su... | 11.94 $ | 250 | CAP FEEDTHRU 50PF 100V AX... |
4310-010LF | Tusonix a Su... | 12.28 $ | 250 | CAP FEEDTHRU 2700PF 100V ... |
4310-019LF | Tusonix a Su... | 12.28 $ | 250 | CAP FEEDTHRU 5000PF 100V ... |
4310-020LF | Tusonix a Su... | 12.76 $ | 23 | CAP FEEDTHRU 10000PF 100V... |
SGE-125-0-4310 05000C-00100C | Omron Automa... | 224.53 $ | 1000 | SAFETY EDGE |
SGE-125-0-4310 00100C-00100C | Omron Automa... | 224.53 $ | 1000 | SAFETY EDGE |
4310R-101-391LF | Bourns Inc. | 0.66 $ | 430 | RES ARRAY 9 RES 390 OHM 1... |
4310R-104-391/581 | Bourns Inc. | 0.24 $ | 1000 | RES NTWRK 16 RES MULT OHM... |
4310R-101-123LF | Bourns Inc. | 0.25 $ | 1000 | RES ARRAY 9 RES 12K OHM 1... |
4310H-101-333LF | Bourns Inc. | 0.28 $ | 1000 | RES ARRAY 9 RES 33K OHM 1... |
431002-26-0 | Curtis Indus... | 7.25 $ | 1000 | CONN BARRIER STRP 26CIRC ... |
431003-26-0 | Curtis Indus... | 7.25 $ | 1000 | CONN BARRIER STRP 26CIRC ... |
431001-27-0 | Curtis Indus... | 7.37 $ | 1000 | CONN BARRIER STRP 27CIRC ... |
431002-27-0 | Curtis Indus... | 7.53 $ | 1000 | CONN BARRIER STRP 27CIRC ... |
RES NTWRK 18 RES 47 OHM 36LBGA47 Ohm 1% ...
RES NTWRK 32 RES 56 OHM 36LBGA56 Ohm 1% ...
RES ARRAY 4 RES 39 OHM 120639 Ohm 5% 62....
RES ARRAY 4 RES 43 OHM 080443 Ohm 5% 62....
RES ARRAY 4 RES 120 OHM 0804120 Ohm 5% 6...
RES ARRAY 2 RES 300 OHM 0606300 Ohm 5% 6...