4310R-102-472

Number of Pins:	10
Height - Seated (Max):	0.195" (4.95mm)
Size / Dimension:	0.984" L x 0.085" W (24.99mm x 2.16mm)
Supplier Device Package:	10-SIP
Package / Case:	10-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	300mW
Series:	4300R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	5
Tolerance:	±2%
Resistance (Ohms):	4.7k
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays,The 4310R-102-472 is a resistor network that consists of four resistors connected in a series circuit. It is primarily used as an voltage-controlled oscillator (VCO) feedback loop in industrial applications. The four resistors that make up the network can be adjusted to control the VCO\'s output frequency and other parameters. In addition, the 4310R-102-472 can be used in power supplies to reduce power losses in high-load circuits.In its most basic form, the 4310R-102-472 consists of four resistors connected in a series circuit with an adjustable voltage divider between them. Each resistor has a different value, so the four resistors together form a low-value voltage divider. The voltage divider can be adjusted to precisely the desired voltage levels needed. The four resistors are usually 10 ohms, 20 ohms, 30 ohms and 40 ohms respectively. The four resistors form four parallel paths with an adjustable resistance between them, which allows for precise adjustment of the voltage divider.The 4310R-102-472 is used in VCOs to control the level of current passing through the connected circuit. By using a voltage divider with adjustable resistors, the current can be finely tuned to achieve the desired frequency range and other parameters. When the four resistors are connected in series, the current flows through them to the voltage setting resistor, which controls the VCO’s output frequency. The adjustable resistor in the voltage divider can be finely tuned to accurately set the VCO’s output frequency, allowing for extreme accuracy and precision.The 4310R-102-472 can also be used in power supplies to reduce power losses in high-load circuits. By using a series circuit of four resistors with adjustable voltage division between them, the total resistance within the circuit can be changed to match the power requirements of the circuit. This ensures that the power is delivered to the circuit in a safe and efficient manner, reducing power losses and improving overall efficiency.In summary, the 4310R-102-472 is an adjustable resistor network that is primarily used in industrial applications such as voltage-controlled oscillators and power supplies. It consists of four resistors connected in a series circuit with an adjustable voltage divider between them. By using adjustable resistors, the current can be finely calibrated to accurately control the VCO’s output frequency, while the total resistance can be adjusted to match the power requirements of the circuit, reducing power losses and improving overall efficiency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description