4310R-102-500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays:

The 4310R-102-500 is an array of five surface mount resistors connected in parallel. The component is particularly well suited to power-supply filtering applications when used in combination with other smaller-value series resistors.

Construction

The 4310R-102-500 consists of five identical surface mount resistors connected in parallel. The resistor values are 100 Ohm for each component. The product can be connected to a circuit board directly or used with other components mounted directly onto the board. The package size therefore can vary depending on the requirements of the target design.

Applications

The most common application of the 4310R-102-500 is in power supplies, where it can help to reduce the output voltage ripple. The component also can be used in combination with smaller-value series resistors to achieve an appropriate voltage threshold.

The 4310R-102-500 can also be used in radio receivers to form a filter network that eliminates bothersome signals. This type of application also requires other components such as inductors. The frequency range where the radio receiver can tune correctly depends on the components used as part of the filter network.

Working Principles

The operation of the 4310R-102-500 depends on an understanding of Ohm\'s law. According to this principle, the current passing through a resistor is proportional to the voltage applied across it. In the case of the 4310R-102-500, the voltage is divided across all five resistors. This has the effect of reducing the overall voltage.

As far as power supplies are concerned, the 4310R-102-500 acts as a filter. The voltage ripple is reduced by the division of the applied voltage across the five resistors. This reduces the current flowing into the load.

When the 4310R-102-500 is used in radio receivers, the filter network formed by the resistors reduces the strength of certain frequencies. The exact frequency range where the radio is able to receive correctly depends on the exact values of the resistors that make up the filter network.

The specific data is subject to PDF, and the above content is for reference