4310R-R2R-503

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks, arrays, and the 4310R-R2R-503 are used extensively in a variety of applications, ranging from industrial and automotive systems to consumer electronics. This article will delve into the application fields and working principles of the 4310R-R2R-503.

The 4310R-R2R-503

The 4310R-R2R-503 is a resistor network consisting of 9 resistors with an output of 50Ω in a 9-pin package. It is manufactured by Toko America and distributed by Newark Electronics. The network features five resistors with a resistance of 10kΩ, three resistors of 1kΩ, and a single resistor with a 906Ω value.

The design of the 4310R-R2R-503 makes it well-suited for applications in which an isolated, low-noise signal of high fidelity is required. The 9-pin package also makes it significantly easier to install than individual resistors. This reduces the chances of errors while also making the design more efficient.

Application Fields

The 4310R-R2R-503 is well-suited for a variety of different application fields due to its desirable properties. It can be used in industrial applications, automotive systems, and consumer electronics. In industrial applications, it is often used as a current or voltage divider. This allows for precise measurement, monitoring, and control of current or voltage levels.

In automotive systems, the 4310R-R2R-503 is used for the same purpose. It can also be used in consumer electronics, such as audio equipment. Here, it is used to convert analog signals into digital ones. It is also used in communication systems, as it contributes to low levels of electrical noise.

Working Principle

The working principle of the 4310R-R2R-503 is remarkably simple. The 9-pin device features nine resistors in a bridge configuration. This bridge arrangement is responsible for the outputs’ 50Ω finish. The four resistors with a value of 10kΩ form two 10kΩ bridges. Three 1kΩ resistors connect the two sides of the 10kΩ bridges and form a 1kΩ bridge. Lastly, the 906Ω resistor is used to link the two bridges together.

The arrangement of the resistors also works to reduce noise levels. This is due to the 906Ω resistor, which diverts any high-frequency signals away from the output. This helps to ensure that only low-frequency signals are transmitted, resulting in a clean signal with minimal interference.

Conclusion

In conclusion, the 4310R-R2R-503 is a resistor network that is used extensively in a variety of applications. It is suitable for industrial applications, automotive systems, and consumer electronics. The network has nine resistors in a 9-pin package, with five resistors with a resistance of 10kΩ, three resistors of 1kΩ, and a single resistor with a 906Ω value. Its working principle is fairly simple: it uses resistors in a bridge configuration which gives the network its 50Ω output. Moreover, the 906Ω resistor also helps to reduce noise.

The specific data is subject to PDF, and the above content is for reference