4312C-4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The RF power dividers or splitters, model 4312C-4 is an important device used in high frequency applications. It is mainly utilized to distribute a single input signal to multiple outputs. The device not only has a wide frequency range, but also features excellent performance and durability. In this article, we will look at the 4312C-4\'s application fields and its working principle.

The 4312C-4 is a wideband, 4-way power divider. It is primarily designed for use in CATV drop-cable systems, mobile communications, microwave and satellite links, frequency-agile systems and radar antenna systems. The device operates over a range of 40 MHz to 1000 MHz. It is suitable for treating signals with an amplitude of 1dBm to 20dBm. It exhibits a low insertion loss of 0.5dB at typical frequencies and a high isolation of up to 25dB. The high-dynamic range VSWR allows the device to operate at multiple frequencies without penalties for reflected power. Additionally, its small size, light weight and easy installation make it suitable for portable applications.

The general working principle of a power divider is the splitting of a signal into two or more distinct outputs. In a four-way power divider such as the 4312C-4, the signal input is divided into four equal parts and each of the four ports is supplied with a quarter of the incident signal. Although the four parts of the signal usually have equal power, the power may sometimes vary by as much as 4-10dB of the average power level.

Theoretically, the power divider can be realized by a microstrip line connected in a π or T-junction. In practical applications, the signal source is usually connected to the center port of the divider, while the output ports are connected to the open ends of the radiating elements. That is, the divider is modeled as an array of impedance-matched lines, with each line connected to a port. As a result, the input signal is equally distributed to all four output ports.

As far as the 4312C-4 is concerned, it realizes the power splitting action by using a combination of lumped elements and microstrip lines. Specifically, the input and output ports are connected by lumped elements, while the microstrip lines are used to couple the input to the output ports. This allows the signal to travel from the input port to all the output ports with minimal losses.

Overall, the RF power dividers or splitters, model 4312C-4 provide a highly efficient method of distributing a single input signal to multiple outputs with excellent performance and durability. It is suitable for a number of different applications and operates over a wide range of frequencies. The device is especially useful in CATV drop-cable systems, mobile communications, microwave and satellite links, frequency-agile systems and radar antenna systems.

The specific data is subject to PDF, and the above content is for reference