43F4K7E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are resistors that are constructed of a highly conductive metal, such as copper. The metal is usually wrapped in a heat-resistant material and it is then placed in a hole or slot of a circuit board to form a connection that leads to the other components on the board. The hole or slot is chosen because it allows the resistor to be securely fastened without taking up much space. A through hole resistor is usually a single component, although there are also multi-component varieties.

43F4K7E is a type of through hole resistors. Its application field is primarily in the test and measurement instruments, such as oscilloscopes, clamp meters and digital multimeters. It is a very precise resistor with a 4K7 value of 43 ohms. This resistor offers good accuracy and stability, making it ideal for use in measuring electrical parameters.

The working principle of the 43F4K7E is based on the resistance of the metal it is made of. When a current is passed through the resistor, it will resist the current based on its value, which is set at 43 ohms. The calculated resistance of the metal will be divided by the amount of current that is passing through it. This resistance is the very basis of the resistor’s function.

The resistor is designed to be very precise, so that it can measure small changes in the current. This is important, as it helps to ensure that the current is consistently measuring the same value. It also helps to ensure that any changes in the current are accurately measured, which is essential for test and measurement instruments.

When it comes to installing the resistor, care must be taken to make sure that it is installed correctly. This is done by soldering the connecting ends of the resistor onto the board’s terminals. This ensures that the resistor will remain securely attached to the board without the risk of it coming loose. Once the resistor is in place, the board can be tested to ensure that it is operating properly.

The 43F4K7E is a good example of a through hole resistor. Its accuracy and stability make it an ideal choice for use in measuring electrical parameters, as well as for other test and measurement instruments. When installing the resistor, care must be taken to ensure that it is securely fastened to the board, which should be done with the help of a soldering iron. By following these steps, the resistor can provide reliable and accurate readings.

The specific data is subject to PDF, and the above content is for reference