43J1K2E

Series:	Ohmicone® 40
Packaging:	Bulk
Part Status:	Active
Resistance:	1.2 kOhms
Tolerance:	±5%
Power (Watts):	3W
Composition:	Wirewound
Features:	--
Temperature Coefficient:	±20ppm/°C
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.220" Dia x 0.594" L (5.60mm x 15.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are widely used electrical components consisting of a component encased in a cylindrical shape with leads extending from each end. The 43J1K2E resistor is a type of through-hole resistor designed for use in high current and voltage applications. It is made of a durable ceramic material and a plated nickel contact.The 43J1K2E resistor is mainly used in automotive electronics, telecommunication systems, household appliances, computers, and other electronic devices. It is ideal for applications that require the use of high-current, high-voltage components. It is also used for audio and video devices, power supplies, and instrumentation equipment.The working principle of the 43J1K2E resistor is based on the Ohm\'s law of electrical resistance. According to this law, the resistance of a component is directly proportional to its current. Therefore, when the current is increased, the resistance of the resistor is also increased, resulting in a decrease in the voltage across the component.The 43J1K2E resistor is designed with two terminals which are connected to a large circular core. The core is made up of a resistive material, usually made of ceramic, which is responsible for providing the desired resistor value. Attached to the core is a plated contact, which provides a contact point for the electrical current to flow through.The core of the resistor is surrounded by metal leads which are connected to either end of the component. The metal leads are also soldered to the printed circuit board, providing the necessary connections for the electrical current to flow through the resistor. The electrical contacts are then connected to the external circuitry, allowing it to be connected to other components of the system.The 43J1K2E resistor is designed to be used in a wide range of applications, from voltage and current regulation, to noise control, to signal conversion. It is also designed to be able to handle high-voltage and high-current applications, providing a reliable component with excellent performances.In order to ensure the best performance of the 43J1K2E resistor, it must be properly installed on the printed circuit board. The leads should be soldered to the board so that the electrical current is conducted properly. The leads must also be insulated properly to protect against shorts and to minimize errors.In addition, the resistor should be connected with the other components of the system, such as transistors, capacitors, and other regulators, to ensure that it is functioning properly in its application. This includes making sure that the contact points on the resistor are properly aligned for current flow.The 43J1K2E resistor is an excellent choice of through-hole resistor for applications requiring high-current and high-voltage components. With its, durable ceramic material and plated nickel contact, it provides a reliable component for high-voltage and high-current applications. Its two terminals provide connection points for external circuitry, while its core is made up of a resistive material, which provides the desired resistor values. Finally, when installed properly on the printed circuit board, the 43J1K2E resistor will provide excellent performance in its application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description