Allicdata Part #: | 43J270E-ND |
Manufacturer Part#: |
43J270E |
Price: | $ 0.36 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 270 OHM 3W 5% AXIAL |
More Detail: | 270 Ohms ±5% 3W Through Hole Resistor Axial Wirew... |
DataSheet: | 43J270E Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.32490 |
Series: | Ohmicone® 40 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 270 Ohms |
Tolerance: | ±5% |
Power (Watts): | 3W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.220" Dia x 0.594" L (5.60mm x 15.10mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are components that are used to reduce the flow of current. They are used in many different electrical applications, ranging from military and aerospace applications, to consumer electronics. The 43J270E Through Hole Resistors are one type of resistors specifically designed for surface mount applications.
The 43J270E is a surface mount resistor with a power rating of up to 10W. It is designed with a lead-free finish, and features a large chip size with low capacitance. The resistor has an operating temperature range of -55°C to 105°C. It is designed to meet the requirements of commercial and military specifications. It also meets the RoHS 2.0 and J-STD-020D requirements.
One of the main applications of 43J270E Through Hole Resistors is in power supply circuits. The resistor can be used to control the output voltage of a power supply. It can also be used to protect the power supply from high voltage spikes. The resistor can also be used to provide input voltage protection for electronic circuits.
Another application of the 43J270E Through Hole Resistors is in amplifier circuits. The resistor can help reduce the noise created by the amplifier. It can also be used to reduce distortion in audio signals. The resistor can also help provide frequency response and stability in amplifier circuits.
The 43J270E Through Hole Resistors feature a low resistance value. This allows them to be used as current-limiting resistors in large LED arrays. The low resistance value also helps to decrease power consumption. It also helps reduce heat generated in the circuit. The resistor is also very resistant to vibration and shock, which makes it well-suited for military and aerospace applications.
The working principle of the 43J270E Through Hole Resistors is based on Ohm\'s law. Ohm\'s law states that the current flowing between two points is proportional to the potential difference between the two points. The resistor helps to reduce the current flowing through the circuit by providing a specific amount of resistance to the current.
In addition to providing resistance to the current, the 43J270E Through Hole Resistors also act as a heat sink. As the current flows through the resistor, some of the energy is dissipated as heat, thus reducing the total power consumption of the circuit. The heat dissipated can also be used to cool other components in the circuit.
The 43J270E is a Through Hole Resistors and is specifically designed for surface mount applications. It can be used in many different types of circuits, including power supplies, amplifier circuits, and LED arrays. It features a low resistance value, which allows it to be used as a current-limiting resistor. It also acts as a heat sink, helping to reduce power consumption and providing cooling to other components in the circuit. The working principle of the resistor is based on Ohm\'s law and is designed to reduce the current flow through the circuit.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
43J225E | Ohmite | 0.36 $ | 1000 | RES 225 OHM 3W 5% AXIAL22... |
43J270E | Ohmite | 0.36 $ | 1000 | RES 270 OHM 3W 5% AXIAL27... |
43J2K0E | Ohmite | 0.55 $ | 1000 | RES 2K OHM 3W 5% AXIAL2 k... |
43J2K2E | Ohmite | 0.55 $ | 1000 | RES 2.2K OHM 3W 5% AXIAL2... |
43J2K5E | Ohmite | 0.55 $ | 1000 | RES 2.5K OHM 3W 5% AXIAL2... |
43J2K7E | Ohmite | 0.55 $ | 1000 | RES 2.7K OHM 3W 5% AXIAL2... |
43J27RE | Ohmite | 0.39 $ | 1000 | RES 27 OHM 3W 5% AXIAL27 ... |
43J20RE | Ohmite | 0.39 $ | 1000 | RES 20 OHM 3W 5% AXIAL20 ... |
43J200 | Ohmite | 0.39 $ | 1000 | RES 200 OHM 3W 5% AXIAL20... |
43J220E | Ohmite | 0.66 $ | 7 | RES 220 OHM 3W 5% AXIAL22... |
43J2R2E | Ohmite | 0.43 $ | 1000 | RES 2.2 OHM 3W 5% AXIAL2.... |
43J2R0E | Ohmite | 0.43 $ | 1000 | RES 2 OHM 3W 5% AXIAL2 Oh... |
43J200E | Ohmite | 0.66 $ | 26 | RES 200 OHM 3W 5% AXIAL20... |
43J25RE | Ohmite | 0.71 $ | 678 | RES 25 OHM 3W 5% AXIAL25 ... |
43J22RE | Ohmite | 0.71 $ | 108 | RES 22 OHM 3W 5% AXIAL22 ... |
43J250E | Ohmite | 0.66 $ | 141 | RES 250 OHM 3W 5% AXIAL25... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...