4400-060LF

Series:	4400
Packaging:	--
Part Status:	Active
Type:	Low Pass
Filter Order:	2nd
Technology:	LC
Number of Channels:	1
Center / Cutoff Frequency:	--
Attenuation Value:	45dB @ 100MHz
Resistance - Channel (Ohms):	--
Current:	10A
Values:	C = 0.027µF
ESD Protection:	No
Operating Temperature:	-55°C ~ 125°C
Applications:	General Purpose
Voltage - Rated:	50V
Mounting Type:	--
Package / Case:	Axial, Bushing
Size / Dimension:	0.157" Dia x 0.340" L (3.98mm x 8.64mm)
Height:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI Filters (LC, RC Networks)

Electromagnetic interference (EMI) and Radio Frequency Interference (RFI) are dangerous sources of interference in electronics that can cause equipment to malfunction, corrupt data or have other detrimental effects. In order to reduce these risks, it is necessary to implement EMI/RFI filters such as LC, RC networks, which effectively reduce the effects of interference.The 4400-060LF EMI/RFI filter is designed to limit the impact of EMI/RFI on electronic systems by cutting off most signals that are above a certain frequency. It achieves this by using a low-pass filter which blocks all signals at the input above a predetermined cutoff frequency. The filter consists of two capacitors: a large value capacitor to for the low-pass section, and a small value capacitor designed to provide a reliable ground connection.The 4400-060LF is designed for filter applications where high frequency noise needs to be attenuated and can be used in a variety of applications from automotive to commercial and industrial applications. It is suitable for use in engine, power, and generator control circuits. Its design offers a high level of selectivity, resulting in fewer false trips when controlling engines and other related machinery. The filter is also well-suited for use in power control circuits, such as inverters and motor drives. The design of the 4400-060LF is based upon the tried and tested RC network configuration. RC networks are one of the most commonly used types of low-pass filter. The filter design offers an excellent common mode rejection ratio (CMRR) and high noise immunity, making it suitable for applications where noise reduction is critical. The filter works by passing low-frequency signals with minimal distortion while at the same time blocking higher frequency signals. The filter is designed to provide maximum attenuation at the frequency of interest without undue loss of low frequency signals. The RC network employed in the filter construction is designed to provide an ideal cutoff frequency with minimal insertion loss and impedance mismatch. The RC network is also designed to reduce common-mode signals in both directions on the source circuit. The common-mode rejection ratio (CMRR) of the circuit is high, ensuring that little common-mode noise will be present in the system. This is particularly important when controlling engines and other related machinery as false trips can easily be caused by common-mode noise.The 4400-060LF is a highly effective way of reducing the effects of EMI/RFI on electronics. Its RC network design ensures high levels of selectivity and noise immunity, making it an ideal choice for a variety of applications where EMI/RFI reduction is a critical requirement. With its low insertion loss and robust construction, the 4400-060LF is an excellent choice for protecting mobile and stationary electrical systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description