4420P-601-250/101

Resistance - Channel (Ohms):	25
Height:	0.114" (2.90mm)
Size / Dimension:	0.510" L x 0.295" W (12.95mm x 7.50mm)
Package / Case:	20-SOIC (0.295", 7.50mm Width)
Mounting Type:	Surface Mount
Voltage - Rated:	25V
Applications:	General Purpose
Operating Temperature:	10°C ~ 85°C
ESD Protection:	No
Values:	R = 25 Ohms, C = 100pF
Series:	601
Attenuation Value:	--
Center / Cutoff Frequency:	--
Number of Channels:	8
Technology:	RC (T-Type)
Filter Order:	1st
Type:	Low Pass
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are a type of device that is designed to reduce the amount of electromagnetic interference (EMI) or radio frequency interference (RFI) that are present in electronic systems. The 4420P-601-250/101 is an example of this filter based on LC (inductance and capacitance) networks. This article will discuss the application field and working principle of the 4420P-601-250/101.The 4420P-601-250/101 is an EMI/RFI filter designed for use in power systems which are operating at 250 VAC or less. This filter is typically used to reduce the amount of EMI noise or spikes present in the power line, thus helping to ensure the smooth operation of electronic systems. It can also be used to filter out high frequency interference that can be caused by sources such as cellular phones, computers, and other electronic devices.The 4420P-601-250/101 consists of two LC networks. The first is an inductor in series with a capacitor, while the second is a capacitor in parallel with a resistor. The combination of these two LC networks helps to create a low pass filter that can remove high frequency interference from the power line. The capacitor in the first LC network stores energy and releases it back into the circuit when the electrical current reaches a certain level. This helps to reduce any spikes in the power line. The resistor in the second LC network allows the capacitor to discharge its energy when the current drops below the desired level, thus helping to reduce or eliminate any EMI or RFI noise present in the power line.The 4420P-601-250/101 is most commonly used for applications where a low EMI level is required, such as in medical equipment, military electronics, and automotive electronics. In addition, this filter can be used in industrial applications such as control systems and computer equipment. Due to its high performance, stability, and wide frequency range, the 4420P-601-250/101 can be used in both high frequency and low frequency applications.In conclusion, the 4420P-601-250/101 is a type of EMI/RFI filter based on LC (inductance and capacitance) networks. This filter is designed to reduce the amount of EMI or RFI noise present in power systems operating at 250 VAC or less. The filter works by combining a series-connected inductor and capacitor, as well as a parallel-connected capacitor and resistor, in order to create a low pass filter that can remove high frequency interference from the power line. This filter can be used in a variety of applications in order to ensure the smooth operation of electronic systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description