4420P-T04-271

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 4420P-T04-271 is classified as a resistor network or array, meaning is actually made of several discrete resistors that are interconnected in a specific pattern to create the desired properties in a single package. The resistors may be connected in parallel, series, or combinations of both, depending on the application.

These networks are used in a wide range of applications, such as amplifiers, filters, and communications systems. They are also used for power distribution, voltage regulation, and for dampening electrical signals. Knowing the basics of their construction and how to use them in circuits can be extremely useful for design engineers.

Resistor networks are commonly manufactured using the "through-hole" technique, in which there is an opening in the board that is connected to each resistor in the array. This can be done through either component leads, which are used to "connect" the individual resistors together, or through printed circuit board (PCB) traces. The latter technique allows multiple resistors to be interconnected in an organized pattern without the use of component leads.

The 4420P-T04-271 uses the former approach of component leads to connect the individual resistors. It consists of nine resistors, each with a value of 2.2 kilohms, arranged in a 3 × 3 array. The resistors are connected in parallel, meaning that their common leads are connected together and each resistor has a positive and negative terminal. This configuration is often used for applications such as voltage or current regulation, as it allows for fine-tuning of the desired resistance value with the addition or removal of individual resistors.

The 4420P-T04-271 is also designed with two additional components to make up the complete "network." The first is a bypass capacitor, which is used to smooth out any noise or "ripples" in the output signal. This is especially useful in audio applications, where the signal may be subjected to external interference. The other component is a ferrite bead, which prevents high-frequency noise from entering the network.

The primary working principles of the 4420P-T04-271 are similar to other resistor networks. The resistors form a divider circuit, meaning that they share the input voltage in a predictable manner. The voltage is determined by the resistors\' relative values, which can be adjusted by adding or removing individual resistors. The bypass capacitor helps to reduce high-frequency noise, while the ferrite bead helps to block the EMI radiation that can affect analog circuits.

The specific data is subject to PDF, and the above content is for reference