445C33G13M00000

Series:	445
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	13MHz
Frequency Stability:	±30ppm
Frequency Tolerance:	±30ppm
Load Capacitance:	30pF
ESR (Equivalent Series Resistance):	50 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-20°C ~ 70°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	2-SMD, No Lead
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Height - Seated (Max):	0.053" (1.35mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Crystals are an integral part of electronics, providing the clock oscillators used in most modern digital circuits. The model 445C33G13M00000 is a popularly used IC (integrated circuit) crystal. It is used in many different electronic applications and is one of the most commonly used IC crystals. This article will discuss the application field and working principles of the 445C33G13M00000 crystal.

Application Field

The 445C33G13M00000 crystal is used in a wide range of electronics, including clocks, receivers, transmitters, modems and microprocessors. It can also be used in a variety of other systems, such as GPS receivers, computer networks, flash memory controllers, alarm systems and car audio systems. As with other crystals, the 445C33G13M00000 can be used in both low-frequency applications (less than 100MHz) and high-frequency applications (over 1GHz).

Working Principle

Crystals are made up of the material quartz, which has a piezoelectric effect. When an electric field is applied to quartz, it changes shape slightly, producing an acoustic wave. This wave is then converted back into an electric signal by the crystal. This process is repeated over and over, resulting in a steady oscillation that can be used to keep a clock accurate and synchronized.The 445C33G13M00000 is a surface-mount crystal, which means that it can be installed directly onto a printed circuit board (PCB). The crystal must be connected to the system clock circuit in order to function properly. Once it is properly connected, the oscillation frequency of the crystal will be determined by the capacitance of the circuit and ground plane. The capacitance will determine the pulse rate of the crystal, which is usually set to a specific frequency that is specific to the application in which it is used.

Conclusion

The 445C33G13M00000 is a widely used IC crystal that is used in a variety of different electronics. Its primary use is in the oscillators used in digital circuits, and it can also be used in many other systems. Its working principle is based on the piezoelectric effect of quartz, which produces an alternating electric signal. When this signal is connected to the appropriate system clock circuit, it will cause the crystal to oscillate at the desired frequency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description