44M45-05-1-02N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary switches are a type of manual switch that are used to control electrical circuits. They are commonly used for selecting one among several possible circuits in a multi-circuit switchboard. 44M45-05-1-02N is a rotary switch that is widely used for different applications and it works on the principle of mechanical action to open and close the switch.

This particular rotary switch is a typically ultra-small rotating action switch with a rotational angle of 45 degrees. In terms of size, it is a very compact switch with a length of only 10.5 mm, a width of 5 mm and a height of 1.2 mm. It is a single pole, double-throw (SPDT) switch with a maximum current rating of 5mA and a voltage rating of 20V DC.

The construction of the 44M45-05-1-02N rotary switch consists of a metal bobbin with an actuator and spring springs, which are held in place by an outer shell of insulating plastics. The spring tensions hold the contacts securely so they can be selected in any combination as the switch is turned. The electrical contact is provided at the back of the switch by means of a rotating contact arm that can move up and down.

The rotary switch is used in a variety of applications including, but not limited to, audio equipment, instrumentation, telecommunications, automotive wiring and robotics. It can be used in different configurations, such as on/off, momentary and latching. In on/off applications, the switch is normally in the off position and when turned is engaged to the on position. In the momentary applications, the switch must remain engaged while being turned and in latching applications, a spring returns the switch to its original position after it has been turned.

The operation of the 44M45-05-1-02N rotary switch is carried out by the mechanical action of a rotating knob being rotated until the desired contact is obtained. It is a very simple switch with a minimum number of parts and very little vibration or noise while operating. It is reliable and economical and is able to switch high frequencies up to 400Hz.

The 44M45-05-1-02N rotary switch is an effective and convenient switch to use for a wide range of applications. Its ability to switch high frequencies and its low cost make it a great choice for applications that require a reliable switch. Its simple operation and small size allow it to be used in a variety of environments and applications.

The specific data is subject to PDF, and the above content is for reference