4501R-116M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, such as 4501R-116M, are passive components used to provide inductance to a circuit. They are typically used in high frequency applications, such as radio frequency (RF) systems, where their characteristics, such as high Q factor and low signal distortions, are most desirable.

Inductors, regardless of their type, store energy in a form of a magnetic field. In a fixed inductor, this magnetic field is generated by a conductive coil, which usually contains thinner wire windings around a ferromagnetic core to increase its inductance.

The 4501R-116M is an SMT inductor, which means that it is designed for surface mount technology, or SMT. This type of inductor is smaller and lighter than its through-hole version, which makes it easier to mount on small circuit boards. It has a gapped ferrite core, meaning that the ferrite core has a small gap that makes the magnetic field weaker. This allows the inductor to sustain high frequency levels and offers higher power and current ratings.

The 4501R-116M is primarily used in RF filters. In these circuits, the inductors can be used to block certain frequencies while passing others. The inductor can also be used as a voltage transformer or impedance matching device. It is also commonly used in switched mode power supplies (SMPS), where the inductor helps to provide energy storage.

The working principle of the 4501R-116M is simple. When an alternating current is applied to its windings, the current produces a magnetic field, which in turn induces an electro-motive force, or EMF, across the inductor. This EMF is a voltage and opposes the flow of current, causing the current to decrease with time. The amount of time it takes for the current to reduce is dependent on the inductance, which is proportional to the number of turns in the inductor winding and the size of the core.

The 4501R-116M is also highly efficient and has minimal electrical losses, which makes it an ideal choice for high-frequency applications. Additionally, it is self shielding, which means it is protected from external sources of interference.

In summary, the 4501R-116M is a fixed inductor designed for surface mount technology. It is used mostly in RF circuits, such as filters, voltage transformers, and impedance matching devices, and is also used in switched mode power supplies. The 4501R-116M works by generating a magnetic field when an alternating current is applied, which in turn induces a voltage across the inductor, reducing the flow of current with time. It is highly efficient and self shielding, making it well suited for high-frequency applications.

The specific data is subject to PDF, and the above content is for reference