4560BP39A0180E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Filters

RF Filters are components that are made specifically to filter out radio frequency signals. They are used in a variety of applications, ranging from high power radio frequency amplifiers to low-powered wireless receivers and transmitters. Of particular importance to the modern engineer is the 4560BP39A0180E.

Application of the 4560BP39A0180E

The 4560BP39A0180E is a band pass filter designed for cellular base stations. This type of filter is used to isolate the signals from base stations from each other, to ensure that there is no interference between the different signals. The filter also protects the base station from interference from external or local sources, such as other base stations or nearby radio stations. The 4560BP39A0180E is designed to filter out all frequencies outside of a specified range, allowing only the desired signals to be received or transmitted.

The 4560BP39A0180E is typically used in a duplexer system, which is a combination of two filters, one for transmitting and one for receiving. This allows the base station to both send and receive signals without interference from external or local sources. The 4560BP39A0180E is designed to operate in a wide variety of temperatures, from -40 to +85 Degrees Celsius. This makes it well suited for use in a variety of climates and conditions.

Working Principle of the 4560BP39A0180E

The 4560BP39A0180E utilizes a number of components to filter out the undesired frequency ranges and pass the desired frequencies. To begin, the filter has a highpass section, which is designed to block out very low frequencies that would otherwise be picked up by the antenna. The highpass section is followed by a lowpass section, which is designed to block out any frequencies that are too high. This helps to ensure that the antenna is only picking up the desired frequencies.

The 4560BP39A0180E also utilizes a diplexer to combine its two sections into one unit. The diplexer is designed to allow certain frequencies to pass through one section of the filter and be blocked out by the other section. This helps to ensure that only those frequencies that are desired reach the base station antenna.

Finally, the 4560BP39A0180E utilizes a bandpass filter. This is a specific type of filter designed to pass only a specific range of frequencies. This helps to ensure that the signals from one antenna have a minimum amount of interference with the signals from the other antennas. The 4560BP39A0180E is designed to operate in a wide variety of conditions, making it well suited for use in a number of applications.

In conclusion, the 4560BP39A0180E is a specific type of filter designed to filter out various radio frequency signals. It is designed to isolate the signals from base stations from each other, to provide protection from interference from other base stations or nearby radio stations, and to ensure that only the desired frequencies are passed through to the antenna. The 4560BP39A0180E utilizes a highpass, lowpass, and a bandpass filter to ensure that only the desired frequencies reach the base station.

The specific data is subject to PDF, and the above content is for reference