Allicdata Part #: | 45F27RE-ND |
Manufacturer Part#: |
45F27RE |
Price: | $ 0.48 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 27 OHM 5W 1% AXIAL |
More Detail: | 27 Ohms ±1% 5W Through Hole Resistor Axial Wirewo... |
DataSheet: | 45F27RE Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.43740 |
Series: | Ohmicone® 40 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 27 Ohms |
Tolerance: | ±1% |
Power (Watts): | 5W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.343" Dia x 0.937" L (8.70mm x 23.80mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are widely used in industrial, especially in 45F27RE. Although it has two terminals, the working principle of through hole resistors in this device is still relatively simple.The working principle of a through hole resistor is based on the fact that electricity passing through a resistor creates an electrical resistance, which creates a voltage drop between two terminals. The voltage drop is proportional to the electrical current, and as the current passes through the resistor, the voltage will drop. Through hole resistors are used in 45F27RE and other devices to ensure that the electric current is maintained at a certain level. In addition, the resistance they offer can be adjusted depending on the specific requirements of the device.Through hole resistors are usually made from a variety of materials such as carbon film, metal film, wire wound and ceramic. Depending on the type of material used, the electrical resistance will vary, and this will affect the amount of voltage that is dropped across the resistor. Carbon film and ceramic through hole resistors are typically used in 45F27RE and other devices due to their superior resistance to humidity and temperatures. Wire wound through hole resistors are also available for use in 45F27RE and other devices. However, their cost is much higher than carbon film and ceramic resistors and usually require manual adjustment of the electrical resistance values. Metal film through hole resistors are also used in 45F27RE and other devices, but they offer a lower resistance compared to wire wound and carbon film resistors.The application of through hole resistors in 45F27RE is essential. They are used to reduce the electrical current flowing through the system, which helps protect the device from electrical damage caused by an electrical short circuit. Additionally, the resistance value of the resistor can be easily adjusted, depending on the specific requirements of the system. In addition, these resistors can also be used to retain the electrical signal, which helps regulate the power to the device.In conclusion, through hole resistors play an important role in 45F27RE and other electronic devices. They help protect the device from electrical damage and maintain a constant electrical signal and voltage, while the resistance value of the resistor can be easily adjusted for the specific requirements of the device.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
45F250 | Ohmite | 0.52 $ | 1000 | RES 250 OHM 5W 1% AXIAL25... |
45F2K2E | Ohmite | 0.53 $ | 1000 | RES 2.2K OHM 5W 1% AXIAL2... |
45F2K0E | Ohmite | 0.53 $ | 1000 | RES 2K OHM 5W 1% AXIAL2 k... |
45F2K5E | Ohmite | 0.53 $ | 1000 | RES 2.5K OHM 5W 1% AXIAL2... |
45F22KE | Ohmite | 0.94 $ | 1000 | RES 22K OHM 5W 1% AXIAL22... |
45F20K | Ohmite | 1.02 $ | 1000 | RES 20K OHM 5W 1% AXIAL20... |
45F25K | Ohmite | 1.02 $ | 1000 | RES 25K OHM 5W 1% AXIAL25... |
45F22K | Ohmite | 1.02 $ | 1000 | RES 22K OHM 5W 1% AXIAL22... |
45F2R0 | Ohmite | 0.68 $ | 1000 | RES 2 OHM 5W 1% AXIAL2 Oh... |
45F2R2 | Ohmite | 0.68 $ | 1000 | RES 2.2 OHM 5W 1% AXIAL2.... |
45F2R2E | Ohmite | 0.63 $ | 1000 | RES 2.2 OHM 5W 1% AXIAL2.... |
45F225E | Ohmite | 0.48 $ | 1000 | RES 225 OHM 5W 1% AXIAL22... |
45F220E | Ohmite | 0.48 $ | 1000 | RES 220 OHM 5W 1% AXIAL22... |
45F270E | Ohmite | 0.48 $ | 1000 | RES 270 OHM 5W 1% AXIAL27... |
45F27RE | Ohmite | 0.48 $ | 1000 | RES 27 OHM 5W 1% AXIAL27 ... |
45F2K7E | Ohmite | 0.53 $ | 1000 | RES 2.7K OHM 5W 1% AXIAL2... |
LC5512MB-45F256C | Lattice Semi... | -- | 1000 | IC CPLD 512MC 4.5NS 256FB... |
LC5512MV-45F256C | Lattice Semi... | -- | 1000 | IC CPLD 512MC 4.5NS 256FB... |
45F2R0E | Ohmite | 1.08 $ | 1115 | RES 2 OHM 5W 1% AXIAL2 Oh... |
45F25KE | Ohmite | 1.64 $ | 289 | RES 25K OHM 5W 1% AXIAL25... |
45F20RE | Ohmite | 0.83 $ | 550 | RES 20 OHM 5W 1% AXIAL20 ... |
45F200E | Ohmite | 0.81 $ | 480 | RES 200 OHM 5W 1% AXIAL20... |
45F250E | Ohmite | 0.81 $ | 167 | RES 250 OHM 5W 1% AXIAL25... |
45F22RE | Ohmite | 0.83 $ | 257 | RES 22 OHM 5W 1% AXIAL22 ... |
45F25RE | Ohmite | 0.83 $ | 1000 | RES 25 OHM 5W 1% AXIAL25 ... |
45F20KE | Ohmite | 1.64 $ | 93 | RES 20K OHM 5W 1% AXIAL20... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...