4605X-101-124LF

Number of Pins:	5
Height - Seated (Max):	0.200" (5.08mm)
Size / Dimension:	0.498" L x 0.098" W (12.65mm x 2.49mm)
Supplier Device Package:	5-SIP
Package / Case:	5-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	200mW
Series:	4600X
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±2%
Resistance (Ohms):	120k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 4605X-101-124LF is a resistor network manufactured by SRP Technology. It is designed to provide the most precise signal performance and reliable uniformity in industrial, medical, and automotive applications. It is most commonly available in an 8-pin SOIC package and is suitable for surface mounting. This article provides a comprehensive overview of the 4605X-101-124LF application field, installation requirements, and working principles.

Application Field

The 4605X-101-124LF is a resistor network that is suitable for a wide variety of applications. In industrial automation, the 4605X-101-124LF can be used to reduce noise and provide pre-programmed digital control signals through the production process. In medical applications, it can be used to calibrate the output of machines and for powering resistive devices. In automotive applications, it provides a reliable and accurate way to reduce unwanted electrical noise, to monitor automotive systems, and to protect electrical circuits and components.

Installation Requirements

The installation of the 4605X-101-124LF requires the connection of a maximum of 8 terminals to the corresponding terminal pins on the resistor network. The connection of multiple terminal pins is possible, however, it is important to ensure that the incorrect terminals are not connected as this may cause the terminals to short out. Each terminal should be connected to the appropriate device using the supplied pin connectors. In addition, the device should be installed in a well ventilated area free from moisture and dust.

Working Principle

The 4605X-101-124LF is a resistor network that uses switchable resistor elements to create different resistive values. It consists of a series of series switches and resistors that are connected by series paths. When the device is powered up, a voltage is applied to the series switches. This voltage causes the switches to open, allowing current to flow through the resistor elements. The combination of the resistor elements and the switch conditions determines the resistive value of the network. Additionally, the resistors can be connected in either parallel or series combinations to achieve different resistive values.The 4605X-101-124LF can be used to create different voltage dividers, voltage followers, current followers, and potential dividers. By adjusting the resistive values, circuitry can be configured to produce any desired voltage and current values. Additionally, the device can be configured to provide isolation and filter capabilities and can be used as a protection device for sensitive circuits and components.

Conclusion

The 4605X-101-124LF is a versatile resistor network that is suitable for a variety of industrial, medical, and automotive applications. It consists of series switches and resistor elements that allow for the creation of different resistive values. The device can be used to create voltage dividers, voltage followers, current followers, and potential dividers. In addition, it can be used as a protection device for sensitive circuits and components. By following the installation instructions and ensuring proper connection of terminals, the 4605X-101-124LF is able to provide reliable and accurate signal performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description