4606X-101-102LF

Series:	4600X
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Circuit Type:	Bussed
Resistance (Ohms):	1k
Tolerance:	±2%
Number of Resistors:	5
Resistor Matching Ratio:	--
Resistor-Ratio-Drift:	--
Number of Pins:	6
Power Per Element:	200mW
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 125°C
Applications:	--
Mounting Type:	Through Hole
Package / Case:	6-SIP
Supplier Device Package:	6-SIP
Size / Dimension:	0.598" L x 0.098" W (15.19mm x 2.49mm)
Height - Seated (Max):	0.200" (5.08mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction The 4606X-101-102LF is a resistive divider network / array component manufactured by Vishay, which can be used in a variety of applications depending on its purpose and its purpose of application. It is designed to provide precision ratio and power handling capability in a small package. It is a network of two precision resistors interconnected from 10 Ohms down to 0.1 ohms in value. It can be used for current sensing, voltage compensation, current sharing, or as part of an active bridge.Application FieldThe 4606X-101-102LF can be used in many applications such as for power supplies, motor control, medical equipment, and audio amplifiers. The precision attenuator with multiple ratio options, precision ratios as low as 0.00001%, and low resistance rations (down to 0.1 Ω) makes it suitable for precision signal conditioning, capacitive and resistive current sensing applications. The component can also be used in conjunction with various active components, such as optocouplers, in high-current applications. The component is also suitable for measuring the resistance of a load or the current that is flowing through it. This is particularly important for continuous current measurement and current control functions of power supplies, motor control circuits, and medical systems. It is also suitable for precision voltage dividing applications, as it can be connected in a bridge configuration for low voltage division measurements. The component can also be used in high-accuracy (> 1%), high-power (> 10 W) circuit designs. It is particularly suitable for pulsed load applications, such as switching power flux circuits, where precise current measurements are required. Working Principle The 4606X-101-102LF component consists of two precision resistors connected in a series or parallel configuration. The resistor ratios are determined by the value of each resistor, and the desired ratio can be easily adjusted by changing the resistance values of each resistor. The component has a precision tolerance down to 0.01%, and a maximum power rating of 10W.The component is most commonly connected in a series configuration, where the first resistor has a higher resistance than the second. In this configuration, the resistor ratios can be as low as 0.001%, yielding a highly accurate and stable signal. In parallel configurations, the resistors must have the same resistance in order for the component to provide accurate readings.When configured in a bridge configuration, the component can measure extremely low voltages with greater accuracy. This can allow for very precise readings for small DC signals and AC signals within the frequency range of the component.Overall, the 4606X-101-102LF component offers a wide range of application possibilities that require precision resolution and power handling capabilities. The component provides a stable, accurate and precise signal path for a variety of applications. The component has multiple resistor ratio configurations, allowing for precise and accurate measurements for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description