4606X-101-332LF

Resistor-Ratio-Drift:	--
Height - Seated (Max):	0.200" (5.08mm)
Size / Dimension:	0.598" L x 0.098" W (15.19mm x 2.49mm)
Supplier Device Package:	6-SIP
Package / Case:	6-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	200mW
Number of Pins:	6
Series:	4600X
Resistor Matching Ratio:	--
Number of Resistors:	5
Tolerance:	±2%
Resistance (Ohms):	3.3k
Circuit Type:	Bussed
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, ArraysThe 4606X-101-332LF ― also simply referred to as a dual-in-line resistor network ― is a passive, two terminal electronic component consisting of several resistors with a common terminal. This component loops the voltage and current across it in a linear fashion, so as to protect sensitive surrounding components. The component itself provides a high degree of switchboard configurability, and can also be used as a control element or sensor. In many systems, electronic components or systems are sensitive to either voltage or current and must be protected against too much of either. Using a 4606X-101-332LF can provide such protection. It is also used in a number of other applications, primarily to provide quick enable/disable circuit paths, reduce signal noise, or provide voltage protection. The 4606X-101-332LF is typically used in miniaturized circuits and works by regulating the voltage and current. By altering either one or both of these properties, devices surrounding the 4606X-101-332LF can be provided with greater protection against overvoltage and/or overcurrent. This works by controlling the amount of impedance of the circuit and forming a kind of “gate” between the input voltage/current and the output voltage/current. The 4606X-101-332LF has several advantages over other types of resistance-based components. It is small and therefore more easily fits into a circuit board than most other components. Additionally, it is a low power component as it does not require much power to operate. In addition, it is inexpensive and can be produced in large volumes, making it relatively cost effective. In terms of design, the 4606X-101-332LF’s dual-in-line form allows it to be easily mounted on a printed circuit board. It also helps ensure a tight, uniform connection between the component and its connection point. Additionally, the component’s construction can be varied to suit the specific requirements of a circuit. In terms of its working principle, the 4606X-101-332LF relies on the notion of impedance. Impedance is the measure of a component\'s ability to resist the flow of current. The 4606X-101-332LF comes in a variety of impedance configurations, which allows it to be used according to the desired effect. For instance, a low impedance configuration allows for more current to pass through the component, while a higher impedance configuration forces more current to be resisted. Overall, the 4606X-101-332LF is a small, low-power, cost-effective passive electronic component used in protoyping and engineering projects for protecting circuits against overvoltage and current. It features a dual-in-line form and offers variable levels of impedance, making it a versatile and highly configurable device. Due to its low power requirements, its small form factor, and its low cost, it is an increasingly popular choice for engineers and circuit designers in need of reliable and flexible protection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description