4607M-101-151LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

4607M-101-151LF belongs to the type of resistor networks, arrays. Resistor networks, arrays are oftern used in controlling the voltage and current between circuits. The 4607M-101-151LF is a type of circuit element used to regulate the voltage or current between two circuits, which are typically the input and output of an electrical system. The 4607M-101-151LF is composed of a resistor array, formed by a number of individual resistors connected in series or parallel.

The basic application of the 4607M-101-151LF is for voltage/current regulation, as it provides a mechanism to adjust or control the current. More specifically, the 4607M-101-151LF is used to provide feedback regulation of the output current, by responding to changes in the input voltage or current. In this way, the 4607M-101-151LF can be used to maintain the stability of the output current, and to ensure that it remains within a certain range or specification.

In addition to its use as a voltage/current regulator, the 4607M-101-151LF can also be used in a variety of other applications. For example, it can be used to provide noise reduction, by limiting voltage transients and interference, and it can be used to protect against overvoltage or overcurrent, by limiting the maximum current passing through a circuit.

To understand the working principle of the 4607M-101-151LF, it is important to first understand the basics of resistor arrays. The network is composed of two Terminal-1 (T1) and Terminal-2 (T2), where each unit in the array is connected in series between these two terminals. A resistor array can be designed to regulate either current or voltage by adjusting the size and number of resistors included in the array.

For current regulation, T1 and T2 are connected to the input and output circuits respectively, and the total resistance of the array is adjusted to control the amount of current flowing from the input to the output. The size of each resistor in the array is typically chosen based on the desired output current, in order to ensure that the resistance of the array is equal to or greater than the total resistance of the input and output circuits combined. This ensures that the current is properly regulated without causing a current overload, or a short circuit.

For voltage regulation, T1 and T2 are connected in series to an outer circuit, and the total resistance of the array is adjusted to control the output voltage. In this case, the size of the resistor in the array will depend on the desired output voltage, with larger resistors producing a larger voltage drop across the array. This ensures that the voltage is properly regulated while still maintaining a safe level.

In summary, the 4607M-101-151LF is a type of resistor network which can be used to regulate the voltage and current between circuits. It is composed of a resistor array, which can be adjusted to control either the current or voltage passing through the network. These networks are used for a variety of applications, such as voltage/current regulation, noise reduction, and protection from overvoltage or overcurrent. Understanding the working principle of the 4607M-101-151LF is essential for its proper integration into a desired application.

The specific data is subject to PDF, and the above content is for reference