4608X-AP1-202LF

Number of Pins:	8
Height - Seated (Max):	0.200" (5.08mm)
Size / Dimension:	0.798" L x 0.098" W (20.27mm x 2.49mm)
Supplier Device Package:	8-SIP
Package / Case:	8-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	200mW
Series:	4600X
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	7
Tolerance:	±2%
Resistance (Ohms):	2k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to 4608X-AP1-202LF

4608X-AP1-202LF is a resistive network made by Fulsar Electronics that is used in a variety of application fields. This resistive network is composed of two similar arrays, each containing forty-two 346 ohm resistors. It is used to create a flat frequency response and reduce signal reflection in a variety of application fields.

Application Fields

4608X-AP1-202LF can be used in a variety of application fields. It is especially useful for high-frequency signal conditioning applications due to its flat frequency response. For example, it can be used in RF surface mount devices as an impedance matching component, providing a controlled impedance to the device for improved signal integrity. The resistive network is also used for impedance-matching in audio applications, providing a stable termination for improved signal integrity. Furthermore, 4608X-AP1-202LF is also used in audio/video applications, acting as a buffer between the video source and destination to reduce signal reflection and return loss. These instances are only a few examples, as 4608X-AP1-202LF is used in various application fields for its flat frequency response and signal integrity improvement.

Working Principle

4608X-AP1-202LF is composed of two similar arrays composed of thirty-six 346 ohm resistors, for a total of seventy-two resistor components. Each of the resistor arrays are connected in a balanced configuration, providing a balanced impedance that minimizes distortions and reflections. The resistance and impedance of each array can be calculated using the parallel resistor formulas. The pairs of resistors form a balanced relation when connected in parallel, resulting in a equal resistance value for each side of the network. This creates a balanced load with equal resistance values for each side, and creates a flat frequency response, which is beneficial for some applications.

Conclusion

4608X-AP1-202LF is a resistive network made by Fulsar Electronics used for various application fields. It is composed of two arrays composed of seventy-two 346 ohm resistors connected in a balanced configuration, creating a balanced load with equal resistance values for each side to create a flat frequency response. This component is beneficial for applications that require impedance matching and reduced signal reflections.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description