Number of Pins:	14
Height - Seated (Max):	0.200" (5.08mm)
Size / Dimension:	1.398" L x 0.098" W (35.51mm x 2.49mm)
Supplier Device Package:	14-SIP
Package / Case:	14-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	300mW
Series:	4600X
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	7
Tolerance:	±2%
Resistance (Ohms):	150
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays - 4614X-102-151LF Application Field and Working Principle

Resistor networks, arrays, and modules are components found in many modern electronic circuits. Designs using these components allow circuit designers to customize their designs even further by providing multiple low-resistance paths for signal and power routing. As such, resistor networks, arrays, and modules are often found in a wide range of applications including digital processing, communication, precision instrumentation, consumer electronics, and power systems.This article will discuss the application field and working principle of the 4614X-102-151LF resistor network, array, or module. This particular component is a 4-Pin 1/4W Resistor Network with 15 resistors. Its total resistance is 102 ohms, with all 15 resistors having an equal value of 6.8 ohms. The 4614X-102-151LF is a 4-terminal resistor network, meaning it has four terminations consisting of three legs of equal length and a center-neutral leg. Each leg can be either positive or negative depending on how it is connected to the circuit.The 4614X-102-151LF is most often found in consumer electronics such as LCD televisions, radios, and home theater equipment. It is also commonly used in audio applications due its low-resistance path. This resistor network can be used in combination with small signal transistors to reduce heat build-up and provide an isolated low-resistance path to reduce voltage drops.In addition to consumer electronics, the 4614X-102-151LF is ideal for applications in which low resistance paths are needed for power supply voltage regulation. In these applications, the resistor network can be used in series with a transistor, allowing for multiple current paths and helping to maintain voltage regulation. The 4614X-102-151LF can also be used to reduce negative feedback in amplifiers and to isolate grounds in control circuits.The working principle of the 4614X-102-151LF is in its ability to distribute signals and power pathways over its four terminations. Each of the three main legs of the resistor network has a resistance of 6.8 ohms, providing a low-resistance path for signals to travel between the legs. The center-neutral leg acts as a common connection between the other legs, allowing for the distribution of power pathways and providing a low-resistance path for signals.The resistance of the 4614X-102-151LF can be adjusted by connecting the legs together in different combinations. For example, if the left and right legs are connected together, the total resistance is reduced to 34 ohms. Likewise, connecting the left and center, or center and right legs together will also reduce the total resistance to 34 ohms. This allows a user to dial in the exact resistance needed for their particular application.In conclusion, the 4614X-102-151LF is a 4-Pin 1/4W Resistor Network with 15 resistors. It is most often found in consumer electronics and audio applications, as well as voltage regulation and amplifier designs. Its working principle is in its ability to distribute signals and power pathways over its four terminations, with the resistance of the network able to be adjusted by connecting the legs in different combinations.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description