4777-6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 4777-6 attenuators are designed to control electromagnetic fields or attenuate electrical signals. This device is mainly used in radiofrequency applications, where it provides an economical way to reduce high frequency signals or noise from entering or exiting a radio frequency-protected environment.

Attenuators, or voltage dividers, are passive components which are used in a variety of applications and come in a variety of shapes and sizes. Generally, an attenuator consists of two or more resistors connected in series. By varying the resistance ratio between the two resistors, the impedance or attenuation of the device can be controlled.

The 4777-6 is a 7-bit voltage divider that offers up to 128 steps of adjustment to reduce the electrical signal power level by as much as -54 dB. It has a wide frequency range of 20 MHz to 1.8 GHz, and it accepts input voltage levels up to 10V. The device also has very low insertion and return losses, and is capable of operating in extreme environmental conditions.

In addition, the 4777-6 is an easy to use control which can be operated from a simple keypad or a serial port. The device can also be remotely controlled and monitored by using an appropriate interface. The device also has a built in Diagnostics feature to indicate voltage, current, and temperature failures.

The 4777-6 is used in a variety of applications such as test and measurement, to reduce the signal power so that the equipment being tested can function as intended. The device is also used in radio frequency power amplifiers to attenuate the signal from the input to the output, and in cellular telephone systems to protect the system from harmful noise. The device is also used in antenna systems to reduce the antenna gain or weaken the signal in certain areas.

The working principle of the 4777-6 attenuator is based on the principle of voltage division. When a signal is applied to the device, it causes a voltage drop which is proportional to the ratio of the resistance values of the individual resistors. Thus, by varying the resistance ratio, the amount of attenuation for the signal can be adjusted.

In summary, the 4777-6 attenuator is a versatile device used to attenuate signals in various radio frequency applications. It is easy to use and has a wide frequency range and low insertion and return losses. Its ability to be remotely monitored and controlled makes it a convenient and reliable way to attenuate signals for a variety of applications.

The specific data is subject to PDF, and the above content is for reference