4779-30

The 4 7 7 9 - 3 0 attenuator is a special type of electronic component that is designed to reduce the amplitude of a signal or waveform from one level to another. It does this by absorbing some of the power of the signal and converting it into heat. This helps to protect sensitive electronic components from damage. The attenuator also helps to reduce noise and interfere with other signals in the same frequency range.Attenuators come in many shapes and sizes, but the basic function is the same. They are usually designed to be used in applications where the signal needs to be reduced in a controlled manner. This can be in the form of an adjustable attenuator, which has a built-in potentiometer that can be used to change the signal level. There are also fixed attenuators, which are designed to reduce a signal to a particular level without being able to adjust it.The 4 7 7 9 - 3 0 attenuator is designed to reduce very high power signals. It is a type of RF attenuator, which is designed to reduce the power of very high frequency signals. It is commonly used in applications such as antenna measurements, where the signal is too strong for the measuring instruments. The 4 7 7 9 - 3 0 attenuator can also be used to reduce the power of signals from electronic devices, such as radios and television sets, so that they do not interfere with other signals in the same frequency range.The 4 7 7 9 - 3 0 attenuator works by absorbing some of the power of the signal and converting it into heat. The heat generated by the attenuator is dissipated through a heatsink or other type of thermal management system. This helps to reduce the level of the signal to a point where it can be used safely without causing any damage or interference.The 4 7 7 9 - 3 0 attenuator is usually composed of three basic components; the filter, the amplifier and the thermal control system. The filter is designed to absorb the portions of the signal that are above a certain level, while the amplifier helps to reduce the level of the signal to a lower level. The thermal control system helps to keep the heat generated by the attenuator from reaching dangerous levels.In conclusion, the 4 7 7 9 - 3 0 attenuator is a type of electronic component that is designed to reduce the amplitude of a signal or waveform from one level to another. It is designed to be used in applications where the signal needs to be reduced in a controlled manner, such as in antenna measurements or to reduce the power of signals from electronic devices. The 4 7 7 9 - 3 0 attenuator works by absorbing some of the power of the signal and converting it into heat, which is then dissipated through a thermal management system.

47792-003LF	Amphenol FCI	0.2 $	1000	CONN PIN 22-26AWG CRIMP G...
47793-000LF	Amphenol FCI	0.12 $	1000	CONN PIN 18-20AWG CRIMP G...
47792-000LF	Amphenol FCI	0.18 $	1000	CONN PIN 22-26AWG CRIMP G...
47791-003LF	Amphenol FCI	0.19 $	1000	CONN PIN 28-32AWG CRIMP G...
47793-003	Amphenol FCI	0.0 $	1000	CONN PIN 18-20AWG CRIMP G...
47791-000	Amphenol FCI	0.0 $	1000	CONN PIN 28-32AWG CRIMP G...
47792-003	Amphenol FCI	0.0 $	1000	CONN PIN 22-26AWG CRIMP G...
477982-8	TE Connectiv...	262.09 $	1000	ENCLUME COMB.070-.110 +
4779-20	L3 Narda-MIT...	177.41 $	40	ATTENUATOR 0-18 GHZ SMARF...
4779-3	L3 Narda-MIT...	166.32 $	10	ATTENUATOR 0-18 GHZ SMARF...
4779-10	L3 Narda-MIT...	188.5 $	20	ATTENUATOR 0-18 GHZ SMARF...
4779-6	L3 Narda-MIT...	188.5 $	15	ATTENUATOR 0-18 GHZ SMARF...
4779-30	L3 Narda-MIT...	232.85 $	15	ATTENUATOR 0-18 GHZ SMARF...
4779-1	L3 Narda-MIT...	255.02 $	10	ATTENUATOR 0-18 GHZ SMARF...
4779-4	L3 Narda-MIT...	266.11 $	15	ATTENUATOR 0-18 GHZ SMARF...
4779-8	L3 Narda-MIT...	266.11 $	15	ATTENUATOR 0-18 GHZ SMARF...
4779-5	L3 Narda-MIT...	266.11 $	1000	ATTENUATOR 0-18 GHZ SMARF...
4779-7	L3 Narda-MIT...	266.11 $	1000	ATTENUATOR 0-18 GHZ SMARF...
2-477982-2	TE Connectiv...	195.48 $	1000	ANVIL COMBINATION
DMX-4779-B	Bud Industri...	10.68 $	33	BOX ALUM BLACK 3.87"L X 3...
DMX-4779-G	Bud Industri...	10.68 $	25	BOX ALUM GRAY 3.87"L X 3....