4814P-2-154LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Any electronic circuits require electrical components such as resistors, capacitors, and inductors to regulate the flow of current and determine the voltage/ current ratios. As the advancement of digital technology, the design of electrical components due to various requirements have increased significantly. A resistor network is a special type of circuit that is used to condition signals, connect multiple electronic components, and keep signals within a specific range. A resistor network provides multiple resistors in a single package that are connected in a special way.

In this context, 4814P-2-154LF is one of the most prominent resistor network components. It is a kind of surface mountable device that provides two resistors which are packaged into a single unit of size 0.078 in. x 0.098 in. x 0.098 in. The two resistors available in this device have values of 1.0 KΩ and 15 KΩ. The two are connected together in a series-parallel arrangement with the common connection grounded to a central tab. This arrangement of resistors produces two paths, a high-value path (1.0 KΩ + 15 KΩ) and a low-value path (1.0 KΩ).

The application of 4814P-2-154LF is mainly in the filtering of low frequencies. It provides a relatively low-impedance path at low frequencies. This allows the device to be used as a filter to reduce unwanted low-frequency signals that cause interference in the circuit. This is especially useful for audio applications, where this low-frequency filtering makes it possible to eliminate low-frequency noise and audio distortions. Furthermore, this device can also be used in a single stage amplifier to prevent the oscillations that can occur due to the combination of the gain stage and the feedback path.

The working principle of 4814P-2-154LF is based on the parallel-series arrangement of its resistors. The two resistors are in a parallel configuration, which provides a low-value path to the output signal. This allows for the attenuation of high-frequency signals, while simultaneously allowing the low-frequency signals to pass through the device with relatively little attenuation. The series configuration of these two resistors provides a high-value path to the output signal, which allows for the attenuation of low-frequency signals while allowing the high-frequency signals to pass through with relatively little attenuation.

The combination of these two resistor configurations produces a dual-resistor device that is able to provide simultaneous low-frequency and high-frequency filtering. This can be used to design audio systems for reproducing high-fidelity sound without the unwanted noise and distortion caused by high-frequency signals. This makes 4814P-2-154LF a highly useful resistor network device for audio systems.

The specific data is subject to PDF, and the above content is for reference