4814P-T01-101LF

Number of Pins:	14
Height - Seated (Max):	0.094" (2.40mm)
Size / Dimension:	0.390" L x 0.220" W (9.91mm x 5.59mm)
Supplier Device Package:	14-SOM
Package / Case:	14-SOIC (0.220", 5.59mm Width)
Mounting Type:	Surface Mount
Applications:	Automotive AEC-Q200
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	160mW
Series:	4800P
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	7
Tolerance:	±2%
Resistance (Ohms):	100
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks and Arrays: Introduction to 4814P-T01-101LF

Resistor networks and arrays are an essential component in the electronic circuitry. As technology advances, so too does the requirement for smaller components that offer enhanced performance. In this article, we’ll delve into the features and working principles of the 4814P-T01-101LF resistor network, a device used in signal conditioning and positioning applications.

What is a Resistor Network?

Also known as a resistor matrix or chip, a resistor network consists of an array of several resistors, usually either three or four resistors, each connected in parallel or series within a single chip or circuit board. Usually, a resistor network is used to provide uniform electrical performance by combining the current signals from independent sources.Resistor networks are somewhat similar to discrete resistors, but with two main differences. Firstly, they come much smaller and often require less space on the circuit board. Secondly, they can be configured in various ways which means that they can be used for a much wider range of tasks than discrete resistors.

Features of 4814P-T01-101LF

The 4814P-T01-101LF resistor network offers low parasitics, low power consumption, and low noise. It consists of four resistors on a single substrate, each resistor having an absolute accuracy of 1%. This offers exceptional performance in signal conditioning and positioning applications.The device comes in a low profile, 14-pin surface mount package. This means that it will occupy minimal space on the circuit board and will not take up too much room in the overall enclosure. It is also extremely reliable and offers a long-term temperature coefficient of +/- 50ppm/°C.

Working Principle of 4814P-T01-101LF

The working principle of the 4814P-T01-101LF is simple but effective. When a current is applied to the network of resistors, each resistor will generate a voltage drop across itself. The total voltage drop across the network is equal to the voltage applied across the network.This voltage drop is then distributed across the resistors in the network, depending on the resistance value and configuration. The resistors then distribute the current evenly among them, thus providing uniform electrical performance.

Applications of 4814P-T01-101LF

The 4814P-T01-101LF is primarily used in signal conditioning and positioning applications. It is design as part of the circuit of data processing and conditioning systems, motion controllers, computer systems, as well as in analog-to-digital and digital-to-analog converters.The 4814P-T01-101LF can also be used in battery charging circuits. It can be used to help maintain the proper charging voltage and current. It prevents catastrophic conditions such as overvoltage or overcurrent from occurring.The 4814P-T01-101LF is also widely used in telecommunications systems. It can be used to help maintain the proper voltage profile of the signal being sent over the network. The device can also be used to stabilize the analog signal being transmitted over the telephone network.

Conclusion

The 4814P-T01-101LF resistor network offers excellent performance and precisely tailored current distribution when applied to signal conditioning and positioning applications. Its small size, low power consumption, and low noise characteristics make it the resistor network of choice for a variety of tasks. And its long-term temperature coefficient ensures reliable operation over a wide variety of temperatures.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description