4814P-2-181LF

Number of Pins:	14
Height - Seated (Max):	0.094" (2.40mm)
Size / Dimension:	0.390" L x 0.220" W (9.91mm x 5.59mm)
Supplier Device Package:	14-SOM
Package / Case:	14-SOIC (0.220", 5.59mm Width)
Mounting Type:	Surface Mount
Applications:	Automotive AEC-Q200
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	80mW
Series:	4800P
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	13
Tolerance:	±2%
Resistance (Ohms):	180
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

A 4814P-2-181LF is a type of resistor network or array. It comprises a grouping of resistors interconnected to form a single component. The word “network” might also be substituted for “array.” The device is segmented into “sections” that are connected to each other as depicted on the schematic.The 4814P-2-181LF has two ports, labeled “IN” and “OUT” on the package. The IN port is connected to a “common” port that is shared across multiple individual, resistor-based sections. Each section is also connected to one unique OUT port. As such, the IN and OUT ports provide the circuitry with both input and output access to each resistor-based section.The main purpose of the 4814P-2-181LF is to “divide” a signal or voltage, either from an input or within the device itself, into a predetermined ratio. This ratio is determined by the number of “taps” or individual resistor within each section. As an example, a 2-tap section would exhibit a 50% voltage potential (or “divide”) from the source.The device can also be used to buffer, or “isolate”, various signals or voltages. This type of application is most frequently used to eliminate possible “ground loop” noise and thus stabilize a signal.In addition, the device can provide current compensation and filtering services. By utilizing selected resistors, one can adjust the signal\'s filter characteristics and response times. This can reduce or eliminate unwanted “high-frequency” noise or “ripple” effects associated with unstable signals.Finally, the device is ideal for “precise voltage division, current sharing, and signal isolation/filtering. It is available in a “leadless” design which reduces the overall size and installation time of the device.In conclusion, the basic purpose of the 4814P-2-181LF is to “divide” signals or voltages into predetermined proportions or to perform signal filtering, noise reduction, and current compensation functions. It is a useful device for many types of electronic applications and can be used as an alternative to discrete resistors or isolation components.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description