4814P-2-203LF

Number of Pins:	14
Height - Seated (Max):	0.094" (2.40mm)
Size / Dimension:	0.390" L x 0.220" W (9.91mm x 5.59mm)
Supplier Device Package:	14-SOM
Package / Case:	14-SOIC (0.220", 5.59mm Width)
Mounting Type:	Surface Mount
Applications:	Automotive AEC-Q200
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	80mW
Series:	4800P
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	13
Tolerance:	±2%
Resistance (Ohms):	20k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Resistor networks, arrays and integrated circuits are essential parts for modern technology. As electrical components, these are the basic units of basic circuits and electronic systems. This article covers the application field and working principle of 4814P-2-203LF, a resistor network.

What is 4814P-2-203LF?

The 4814P-2-203LF is a resistor network. It is a two−terminal array consisting of two complex networks of resistors, capacitors and inductors with a total of 20 elements. It is a passive component that combines a combination of capacitors, resistors and inductors to obtain a desired response to the signal.

Applications

Resistor networks are an essential component in a variety of applications. The 4814P-2-203LF has been used in a variety of industries and applications such as automotive, communications, instrumentation, military and aerospace. One of the most common uses of resister networks is in the design of filters. They are used to reduce the higher frequency components of a signal, such as ripple and noise in a circuit. The 4814P-2-203LF can be used as a filter for frequency bands from hundreds of kHz to GHz. The 4814P-2-203LF is also used in the measurement and control of analog systems. It can be used to provide gain and regulate the amplitude of a signal or to provide temperature compensation. The 4814P-2-203LF is also used in amplifiers to provide the needed output voltage or current.

Working Principle

The 4814P-2-203LF resistor network works by combining capacitors, resistors and inductors to provide an electrical response to the input signal. Capacitors are passive electrical components used in circuits to store energy. The capacitors in the 4814P-2-203LF change their capacitance depending on the input voltage, resulting in a modified output. Resistors are also components used in circuits. Resistors have a specific resistance, and when placed in a series or parallel configuration they will form a network. The resistance value of the network is determined by the individual resistance of the resistors, and this value can be modified by changing the configuration. The resistors in the 4814P-2-203LF are used to reduce the signal amplitude or provide impedance matching.Inductors are another type of component used in circuit design. These are used to store energy in a magnetic field, and can be used to modify the output signal of the circuit. The inductors in the 4814P-2-203LF help to control the resonant frequency, and filter out any undesired signals.

Conclusion

The 4814P-2-203LF resistor network is a two−terminal array consisting of two complex networks of resistors, capacitors and inductors with a total of 20 elements. It is a passive component used in a variety of applications such as automotive, communications, instrumentation, military and aerospace. It works by combining capacitors, resistors and inductors to provide an electrical response to the input signal. This article has described the application field and working principle of the 4814P-2-203LF resistor network.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description