4814P-T02-391

Number of Pins:	14
Height - Seated (Max):	0.094" (2.40mm)
Size / Dimension:	0.390" L x 0.220" W (9.91mm x 5.59mm)
Supplier Device Package:	14-SOM
Package / Case:	14-SOIC (0.220", 5.59mm Width)
Mounting Type:	Surface Mount
Applications:	Automotive AEC-Q200
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	80mW
Series:	4800P
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	13
Tolerance:	±2%
Resistance (Ohms):	390
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 4814P-T02-391 is a type of resistor network, array. It is made of two resistors, configured to form a T-Type connection. The two resistors are connected in such a way that there are two inverting outputs, each at 90oC. This connection is used to provide isolation between inputs and outputs, while still allowing for high speed operation.The 4814P-T02-391 resistor network is used in a variety of applications and industries, including: * Automotive: This type of resistor network is often used in automotive applications, such as engine management and exhaust systems. * HVAC: This type of resistor network is also used in HVAC systems, to provide current limiting and protection. * Aerospace: This type of resistor network is often used in aerospace applications, such as aircraft engines and avionics. The working principle of the 4814P-T02-391 resistor network is fairly simple. It is based on the principle of Ohm\'s law, which states that the voltage across a resistor is proportional to the current flowing through it. By placing two resistors in a T-type connection, it is possible to control the current flowing through them. The two resistors need to be of different values, and the value of one resistor needs to be greater than the other. The two outputs will be at different voltage levels, and depending on the resistance values chosen, one output can be positive and the other negative relative to the power supply voltage. The 4814P-T02-391 resistor network is a very useful tool for providing isolation between inputs and outputs. For instance, it is common in automotive applications to use the 4814P-T02-391 resistor network to provide isolation between the ECU (Engine Control Unit), and the injectors or other parts of the system. This provides protection from accidental short circuits or other conditions that could cause damage to the electrical components in the system. The 4814P-T02-391 resistor network is also used in applications such as power supplies, where it is used to prevent voltage spikes or other sudden changes in current, that could otherwise damage sensitive electronic components. This type of resistor network can also be used to provide current limiting to motors, such as those used in robotics, to prevent excessive current draw that could cause damage. In summary, the 4814P-T02-391 resistor network is a useful tool, used in a variety of applications. It is based on the principle of Ohm’s law, and provides two outputs, at different voltage levels, to provide a level of isolation between inputs and outputs. This type of resistor network is commonly used in automotive, HVAC, aerospace, and other industries, and provides current limiting and protection, as well as voltage spikes or other sudden changes in current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description