4816P-1-103F

Number of Pins:	16
Height - Seated (Max):	0.094" (2.40mm)
Size / Dimension:	0.440" L x 0.220" W (11.18mm x 5.59mm)
Supplier Device Package:	16-SOM
Package / Case:	16-SOIC (0.220", 5.59mm Width)
Mounting Type:	Surface Mount
Applications:	Automotive AEC-Q200
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	160mW
Series:	4800P
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	8
Tolerance:	±1%
Resistance (Ohms):	10k
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks and arrays have become an important component of many electrical devices. One common example is the 4816P-1-103F. This product is specifically designed and produced for use in higher power applications. It is intended to reduce the amount of noise or unnecessary electromagnetic radiation generated by electrical components. This article will discuss the application areas and working principle of 4816P-1-103F. The primary goal of the resistor networks and arrays is to control the current that flows through a circuit. This is accomplished by adding resistors in parallel to the circuit, thereby reducing the total current. In general, the resistors are arranged in a series of networks, with each network being connected to the previous one. Depending on the required current flow, the total number of resistors used can vary.A resistive network is made up of a series of resistors in the form of a bridge. This is usually formed by four resistors connected in a T-shape. This type of network is used in high voltage applications or where precise current control is required.In contrast, a resistor array is a group of resistors arranged in a particular way. Usually, the resistors are placed in such a way that their resistance values are equal or nearly equal. This type of array is used when current control is less crucial and noise reduction is needed in the circuit. It\'s also commonly used for creating high frequency waves or reducing the level of incoming signals. The 4816P-1-103F is a resistive network specifically designed for use in higher power applications. This product can be used to significantly reduce the amount of noise generated by components in the circuit. It has two sets of resistors that are connected in a network. The first set consists of four resistors that are arranged in a T-shape. This forms the bridge. The second set of two resistors are connected in parallel to the first set and serve as the current limiting resistors.The main purpose of the 4816P-1-103F is to reduce the noise generated by the components in the circuit. It does this by acting as a filter. This filter reduces the amount of electromagnetic energy that passes through the components, thus reducing the amount of noise. This is particularly useful in applications where noise can potentially interfere with the operation of the system. The 4816P-1-103F has also been shown to be effective in reducing the amount of interference caused by mobile phones. This is due to the way it filters out the incoming signal, thus reducing the amount of energy that passes through the components. In this way, it can be used as an effective shield against outside interference.Overall, the 4816P-1-103F is an effective device for reducing noise and improving circuit performance. Its simple design and low cost make it an attractive alternative to more complex and expensive solutions. This makes it a valuable component in many high power applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description