4816P-T01-822LF

Number of Pins:	16
Height - Seated (Max):	0.094" (2.40mm)
Size / Dimension:	0.440" L x 0.220" W (11.18mm x 5.59mm)
Supplier Device Package:	16-SOM
Package / Case:	16-SOIC (0.220", 5.59mm Width)
Mounting Type:	Surface Mount
Applications:	Automotive AEC-Q200
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	160mW
Series:	4800P
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	8
Tolerance:	±2%
Resistance (Ohms):	8.2k
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays, and 4816P-T01-822LF Application Field and Working PrincipleResistor networks and arrays are a type of electrical component that offer a variety of benefits and have various applications in industries such as automotive, telecommunications, military, and aerospace. Resistor arrays, in particular, provide increased ability for signal conditioning and noise immunity. The 4816P-T01-822LF is an example of a resistor network which is used in these industries and many more. This document will serve to elucidate its application field and working principle.A resistor network is primarily used for the purpose of matching relative voltage levels in electrical circuits. This is due to their ability to convert a higher voltage level to a lower one. They can also be used to balance current in multiconductor transmission line applications. The 4816P-T01-822LF is a resistor network that consists of 8 resistors in an array made up of 4 rows and 2 columns. This resistor array is low power and is comprised of two 120m ohm resistors and six 150m ohm resistors. This resistor network operates using a 5 Volt power supply and features an output resistance of 60m ohms which gives it an overall resistance value of 120m ohm.The 4816P-T01-822LF is primarily used in applications that require an input signal suppression. This is because its ability to match relative voltage levels allows it to match level impedances and reduce interference in circuits. This device is also used in wireless control systems where it is employed for frequency bucking and to reduce output noise. It is also used in impedance compensation networks to help minimize phase shift and adjustment outside of a signal’s frequency range.In order to understand the operation of the resistors in the 4816P-T01-822LF, it is important to first understand the principle of resistor networks. Resistor networks allow voltage levels to be reduced via the formation of a shunt between two terminals. This is accomplished by connecting the two terminals of the resistor network to the two ends of the shunt. A high signal input is passed through the resistor network, and then the output is taken across the two terminals where the shunt was connected.The 4816P-T01-822LF is designed to increase noise suppression and reduce interference. This is accomplished by the use of the 8 resistors in its array. The first two resistors, which are the 120m ohm resistors, act as the main two shunt resistors between the two terminals of the resistor array. The 6 additional resistors form the needed voltage divider which reduces voltage levels.In summary, the 4816P-T01-822LF is a low power resistor network which is used for input signal suppression, frequency bucking, and impedance compensation. It is comprised of 8 resistors in a 4 row by 2 column array and operates by forming a shunt between two terminals of the resistor network. This allows for relative voltage levels to be matched and provides for noise suppression and interference reduction. By taking advantage of the 4816P-T01-822LF’s flexible design and understanding its principle of operation, industries such as automotive, telecommunications, military, and aerospace will benefit from its utilization.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description