4816P-3-222/562

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks, arrays and other similar components are commonly used components in electrical engineering projects. The 4816P-3-222/562 is a type of network composed of two parallel networks of resistors comprising of two input networks (222 Ohm) and output networks (562 Ohm). The network is suitable for both noisy and quiet environments, making it a suitable choice for many applications.

This type of network is often used in signal conditioning and power electronics applications, where the two networks create a voltage divider with a divider ratio of precisely 2.25:1. When connected across a novel load, it behaves as a voltage limiter for any voltage held above the threshold voltage of 2.25V. This helps to protect other components from voltage overstress.

The 4816P-3-222/562 network is a passive component and uses resistors as its primary component. All resistors, such as the 222 Ohm input network resistors and the 562 Ohm output network resistors, are wired in parallel to create the two networks. On the input side, two resistors are connected in parallel with each other, while on the output side two more resistors also parallel and connected in series are connected across the input side.

When the voltage is applied to the two resistors on the input side, the current through the resistors is divided to the output side, such that the output voltage is 2.25 times greater than the input voltage. The current through the output resistors is also limited such that it does not exceed the limit of the total resistance. This creates a voltage limit of 2.25V which helps protect other components.

The 4816P-3-222/562 network can also be used in several other applications, such as in protection against overvoltages, current sensing, input sensing, etc. Moreover, this type of network is also used for power supply applications as it helps to safeguard the voltage and current level when operating at higher temperatures. This ensures that the components stay within their specified safe limits even at high temperature environments.

This type of network is an ideal choice for applications that require an extra layer of protection. It is also used in control systems, such as automated robots and medical devices, to maintain the stability of the system even in the presence of interference. Because this type of network is quite reliable and cost effective, it is often found in consumer products such as computers, laptops and other electronic devices.

In summary, the 4816P-3-222/562 network is a reliable and cost effective component suitable for protection from overvoltage, voltage sensing, current sensing and power supply applications. It can be used in both noisy and quiet environments, making it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference