4EA1000A0Z4AACUGI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators are electrical components used in a wide range of electronic equipment to serve as an electronic reference clock source. The 4EA1000A0Z4AACUGI8 is one type of such oscillator which takes the form of a small surface mount device featuring low power consumption and a high level of reliability for various applications.

This product comes with four pins labeled A, B, C and ND (no connection). It allows manual selection of one of three possible output frequencies by means of external connection of two of these pins. Thus, the 4EA1000A0Z4AACUGI8 spares users from the cost of stocking multiple components in order to provide different frequencies. This is a major advantage over other types of oscillators, giving it superior flexibility for users.

The 4EA1000A0Z4AACUGI8 oscillator is suitable for consumer applications such as computers and other equipment requiring multiple different clock frequencies. It is particularly advantageous for applications where tuning set-up and calibration equipment cannot be used or is too costly. Furthermore, this oscillator is self-powered and hence does not require external power supply, making it ideal for dynamic systems where precise control of the frequency is of utmost importance.

The operation of 4EA1000A0Z4AACUGI8 oscillator is based on the principle of single crystal quartz. This technology is used to accurately control the frequency of the output signal by selecting the frequency at which the crystal vibrates. The selected frequency is then amplified by an amplifier and then passed to the output.

The four pins of 4EA1000A0Z4AACUGI8 Pin Configurable/Selectable Oscillator play an important role in its functioning. The pins labeled A and C serve as the input pins for selection of frequency. The meaning of the A and C pins varies with different manufacturers, but essentially the two pins are responsible for setting the frequency value. Depending on the connection of these two pins, the output frequency generated from the device is varied.

The other two pins, B and ND (no connection), play a different role. The B pin is responsible for supplying voltage to the input pins A and C, and it is typically connected to either a +5v or ground source. The ND pin is reserved for stray capacitance, and typically it is not connected to anything.

The 4EA1000A0Z4AACUGI8 Pin Configurable/Selectable Oscillator provides a substantial level of frequency selection, allowing users to quickly and conveniently select the desired frequency without having to purchase additional components. The oscillator is suitable for a wide range of consumer applications and offers users highly reliable performance and low power consumption.

The specific data is subject to PDF, and the above content is for reference